Abstract:The microstructure and impact toughness evolution mechanism of the Ce‐containing high‐Mn austenitic steel weld metals under different heat inputs are revealed, and it is found that adding Ce and reducing heat input could improve cryogenic impact toughness, mainly due to its ability to refine the microstructure, increase the proportion of large‐angle grain boundaries, and reduce the number of coarse inclusions. The Ce‐containing novel cryogenic high‐Mn austenitic steel weld metals under different heat inputs are prepared by submerged‐arc welding to provide a satisfactory welding parameter scheme and further optimize its cryogenic impact toughness. The effect of heat input on microstructure, inclusion, and cryogenic impact toughness of weld metals are investigated via optical, scanning electron microscopy, electron backscatter diffraction, electronic probe microanalyzer, and cryogenic impact test. The results show that the dendrite arm spacing, segregation ratio of Mn, Si, and C elements and average effective grain size of the weld metals gradually increase, and the proportion of high‐angle grain boundaries decrease with the heat input increase from 11.91 to 20.24 kJ cm−1. The type of inclusions of weld metal with different heat inputs are all Ce2O3 and Ce2O2S. The number density of inclusions decreases monotonically from 5976 to 4912 mm−2, while the average size increases from 0.32 to 0.45 μm with the heat input increased. The increase in heat inputs consistently decreases the mean cryogenic impact toughness of weld metals from 123 to 102 J. The higher proportion of high‐angle grain boundaries and finer inclusions at lower heat input play the critical role in improving the cryogenic impact toughness.

Tailoring the Microstructure of Coarse-Grained HAZ in Steel for Large Heat Input Welding: Effect of Ti–Mg–Ce–V Inclusion/Precipitation Particles

Improvement of impact toughness by microstructure refinement of simulated CGHAZ through enhancing welding heat input of low carbon Mo-V-Ti-N-B steel

Inclusion Evolution Behavior of Ti-Mg Oxide Metallurgy Steel and Its Effect on a High Heat Input Welding HAZ

Effect of Zr-Ti Combined Deoxidation on Toughness of Coarse-Grained Heat-Affected Zone with High Heat Input Welding of Low Carbon High Strength Steels

N-induced Microstructure Refinement and Toughness Improvement in the Coarse Grain Heat-Affected Zone of a Low Carbon Mo–V–Ti–B Steel Subjected to a High Heat Input Welding Thermal Cycle

Effect of Welding Processes with High Heat Input on the Microstructure and Toughness of Coarse-Grained Heat-Affected Zone of a High-Strength High-Toughness Steel

Coarse Grained Region Microstructure and Properties of High Heat Input Welding DH36 Steels

Coarse‐Grain Heat‐Affected Zone Microstructure Evolution and Crack Propagation of Ca‐Treated Q550 Thick‐Steel Plate by High‐Heat Input Welding

Microstructure Evolution and Cryogenic Impact Toughness Changes in Ce‐Containing Novel Cryogenic High‐Mn Austenitic Steel Weld Metals under Different Heat Inputs

Microstructure and Properties of Coarse Grain Zone in Single-Pass Welding of V-N Microalloyed Steel

Effect of heat input on the microstructure and mechanical properties of the simulated coarse-grained heat-affected zone (CGHAZ) of novel twining-induced plasticity(TWIP) steel

Fine Structure in Coarse Grain Region of Fine Grained Titanium Alloy

Elucidating the heat input on CGHAZ microstructure and its irregular effect on impact toughness for a novel V-N microalloying weathering steel

Enhancing the Mechanical Properties Induced by Ta Microalloying in TIG-Welded Ti2AlNb-Based Intermetallic Alloy

Effect of Ce Content on Microstructure-Toughness Relationship in the Simulated Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels

Effect of Ferritic Morphology on Yield Strength of CGHAZ in a Low Carbon Mo-V-N-Ti-B Steel

Inclusions and Microstructure of Steel Weld Deposits with Nanosize Titanium Oxide Addition

In-situ Observations of Grain Refinement by TiN Particles in the Simulated Coarse-Grained Heat-Affected Zone of a High-Strength Low-Alloy Steel

Metallographic, Structural, and Mechanical Characterization of Weld Nuggets in Fe–Mn–Al–C Low‐Density Steels Microalloyed with Ti/B and Ce/La by Gas Tungsten Arc Welding Process

Effect of Initial Microstructure on the Toughness of Coarse-Grained Heat-Affected Zone in a Microalloyed Steel

Tailoring Heterogeneous Microstructure in a High-Strength Low-Alloy Steel for Enhanced Strength-Toughness Balance