Abstract:The mechanisms of oxide metallurgy include inducing the formation of intragranular acicular ferrite (IAF) using micron-sized inclusions and restricting the growth of prior austenite grains (PAGs) by nanosized particles during welding. The chaotically oriented IAF and refined PAGs inhibit crack initiation and propagation in the steel, resulting in high impact toughness. This work summarizes the combined effect of deoxidizers and alloying elements, with the aim to provide a new perspective for the research and practice related to improving the impact toughness of the heat affected zone (HAZ) during the high heat input welding. Ti complex deoxidation with other strong deoxidants, such as Mg, Ca, Zr, and rare earth metals (REMs), can improve the toughness of the heat-affected zone (HAZ) by refining PAGs or increasing IAF contents. However, it is difficult to identify the specific phase responsible for IAF nucleation because effective inclusions formed by complex deoxidation are usually multiphase. Increasing alloying elements, such as C, Si, Al, Nb, or Cr, contents can impair HAZ toughness. A high C content typically increases the number of coarse carbides and decreases the potency of IAF formation. Si, Cr, or Al addition leads to the formation of undesirable microstructures. Nb reduces the high-temperature stability of the precipitates. Mo, V, and B can enhance HAZ toughness. Mo-containing precipitates present good thermal stability. VN or V(C,N) is effective in promoting IAF nucleation due to its good coherent crystallographic relationship with ferrite. The formation of the B-depleted zone around the inclusion promotes IAF formation. The interactions between alloying elements are complex, and the effect of adding different alloying elements remains to be evaluated. In the future, the interactions between various alloying elements and their effects on oxide metallurgy, as well as the calculation of the nucleation effects of effective inclusions using first principles calculations will become the focus of oxide metallurgy.

Effects of Al Addition on the Microstructure of Fe-Mn-Si Ultra-Fine Grain Steel Welded Heat Affected Zone

Effects of Cu Addition on the Microstructure and Properties of the Al–Mn–Fe–Si Alloy

Effect of Electromagnetic Stirring on Fine Grain Formation and Tensile Property Improvement for Fe-Ni Superalloy

Effect of Mg Addition on the Microstructure and Properties of a Heat-Affected Zone in Submerged Arc Welding of an Al-Killed Low Carbon Steel

Improved Strength and Enhanced Pitting Corrosion Resistance of Al-Mn Alloy with Zr Addition

Effect of Initial Microstructure on the Toughness of Coarse-Grained Heat-Affected Zone in a Microalloyed Steel

Effect of inclusions on toughness and microstructures in simulated coarse-grain heat-affected zones of Al/Ti deoxidised and Nb/V microalloyed steels

Influence of Al addition on the grain boundary oxidation of Ultra High Strength Steels during hot coiling

On the role of Cu addition in toughness improvement of coarse grained heat affected zone in a low carbon high strength steel

Effect of Al addition on the microstructures and deformation behaviors of non-equiatomic FeMnCoCr metastable high entropy alloys

Modification and characterization of the Al concentration induced precipitate in the Fe3Al-based iron aluminide fabricated using the wire-arc additive manufacturing process

Development in oxide metallurgy for improving the weldability of high-strength low-alloy steel—Combined deoxidizers and microalloying elements

Effects of Al3(Sc1-Zr ) nano-particles on microstructure and mechanical properties of friction-stir-welded Al-Mg-Mn alloys

Research on the mechanism of Cu addition on the grain boundary characteristics and toughness in CGHAZ of low carbon low alloy steel

Microstructure, Mechanical Properties and Corrosion Behaviors of Al–Li–Cu–Mg–Ag–Zn Alloys

Effects of Al on the precipitation of B2 Cu-rich particles in Fe–Cu ferritic alloy: Experimental and theoretical study

Effect of aging state on microstructure and properties of heat affected zone in Al–Mg–Si–Cu alloy welded joints

Tailoring the brittle phase precipitation and mechanical properties in developing ultra-super ferritic stainless steels by Al modification

Effect of Al on the microstructure and corrosion resistance of high-Mn steel

Microstructure and Properties of Coarse Grain Zone in Single-Pass Welding of V-N Microalloyed Steel

Microstructure Evolution and Mechanical Properties of Friction Stir Welded Al–Cu–Li Alloy