A Sc0.096Al0.904N-Based Bimorph Piezoelectric MEMS Microphone Using 3 × 3 Circular Diaphragms

Bohao Hu,Wenjuan Liu,Yan Liu,Chaoxiang Yang,Zekai Wang,Liangyu Lu,Yao Cai,Shishang Guo,Chengliang Sun
DOI: https://doi.org/10.1109/TED.2024.3376320
IF: 3.1
2024-05-01
IEEE Transactions on Electron Devices
Abstract:This work presents a bimorph piezoelectric microelectromechanical system microphone (b-PMM) with high receiving sensitivity and signal-to-noise ratio (SNR) based on an array of circular diaphragms in a size of $0.375\times 3\times3$ mm3. The b-PMM is fabricated using Sc0.096 Al0.904 N with thicknesses of 486.56 and 478.45 nm, respectively. The lumped element model and mechanical analysis of the diaphragm array are established, and the bimorph structure shows increased sensitivity and decreased noise. Electro-acoustic measurements are presented in an anechoic test box (B&K 4232). Compared with the AlN-based b-PMM, the sensitivity and SNR of the ScAlN-based one are −69 dB (re: 1 V/Pa) and 58.4 dB at 1 kHz, increased by 16.4% and 3.4 dB, respectively. Besides, the measured minimum detectable pressure (MDP), resolution, and total harmonic distortion (THD) are 35.6 dB SPL, 34 dB SPL, and 0.087% at 1 kHz, respectively. The ScAlN-based b-PMM with high noise resolution will have a bright prospect in application scenarios such as intelligent voice acquisition and control scenarios.
What problem does this paper attempt to address?