Abstract:Ultrasonic transducers are vital components for transmitting and receiving sound waves, which are customized to specific applications based on their operating frequencies.Small-sized high-frequency ultrasonic transducers have gained considerable attention and adoption in medical ultrasound imaging and small pipe flow testing. However, the significant impact of attenuation on high-frequency ultrasound restricts detection distance and degrades the signal-to-noise ratio. Additionally, thin-film high-frequency ultrasound transducers exhibit low output sound pressure, due to their low resonance displacement. In this study, we present an innovative approach to address these challenges through the design of an integrated small-size honeycomb-type top, two-electrode aluminum nitride (AIN)-based high-frequency ultrasonic transducer. A comprehensive investigation of the relationship between transducer size, sensitivity, and transmitted sound pressure levels is conducted. Leveraging microelectromechanical systems (MEMS) micro-nano-machining technology, we fabricate a 14 × 13 array with a unit diameter of 50 μm, and a matching circuit is employed to enhance the transducer's amplitude. Experimental results demonstrate remarkable transmit sound pressure levels (SPL) exceeding 210 dB (re:1 μPa/V) at a distance of 2 cm, with a maximum transmit SPL of 233 dB, and the receive sensitivity surpasses − 175 dB (re:1 V/μPa) and, at the 5 MHz resonance, the sensitivity reaches − 143 dB (re:1 V/μPa). Moreover, the transmit and receive linearity values demonstrate 99% and 98%, respectively. Our findings highlight the significant potential of the proposed high-frequency ultrasonic transducer for a diverse range of applications.

A Piezoelectric AlN MEMS Hydrophone with High Sensitivity and Low Noise Density

Design and Characterization of an Aluminum Nitride-Based MEMS Hydrophone With Biologically Honeycomb Architecture

A High-Performance 9.5% Scandium-Doped Aluminum Nitride Piezoelectric MEMS Hydrophone With Honeycomb Structure

A ScAlN Piezoelectric High-Frequency Acoustic Pressure-Gradient MEMS Vector Hydrophone With Large Bandwidth

A Novel MEMS Based Piezoresistive Vector Hydrophone for Low Frequency Detection

A bionic micro-electromechanical system piezo-resistive vector hydrophone that suppresses vibration noise

Fabrication and Calibration of Nanostructured Vanadium-Doped ZnO-based Micromachined Sensor with Superior Sensitive for Underwater Acoustic Measurement

Design and Test about High Sensitivity Thin Shell Piezoelectric Hollow Sphere Hydrophone

Low-Cost, High-Sensitivity Hydrophone Based on Resonant Air Cavity

Design, Fabrication, Characterization, and Simulation of AlN-Based Piezoelectric Micromachined Ultrasonic Transducer for Sonar Imaging Applications

A Bionic Fish Cilia Median-Low Frequency Three-Dimensional Piezoresistive MEMS Vector Hydrophone

Simulation Study on Optimization Design of MEMS Hydrophone Based on AlN Film

Unclosed Hexagonal Piezoelectric MEMS Hydrophone Based on Rigid-Flexible Composite Membrane

Design of a charge-sensitive amplifier for MEMS piezoelectric hydrophone

Membraneless Piezoelectric MEMS speakers based on AlN Thin Film

Enhanced high-frequency piezoelectric ultrasonic transducer based on integrated AlN honeycomb structure

Design, Fabrication, Characterization and Simulation of AlN PMUT for Sonar Imaging Applications

Design and Implementation of a Four-Unit Array Piezoelectric Bionic MEMS Vector Hydrophone

A MEMS-Based Co-Oscillating Electrochemical Vector Hydrophone

Design and simulation of an aluminum nitride piezoelectric resonant pressure sensor

Hydrogel microphones for stealthy underwater listening