Abstract:Due to high global warming potential (GWP) of hydrofluorocarbons (HFCs), the separation and recovery of HFCs from different refrigerant mixtures is an important issue. Most HFC mixtures are azeotropic in nature, thereby rendering the conventional distillation-based separation difficult and energy intensive. Extractive distillation (ED) with ionic liquid (IL) as solvent provides an attractive strategy for selective separation of HFC mixtures. However, systematic design and optimization of ED-based separation processes is nontrivial. In this work, we present SPICE_ED which is a software framework for the detailed design, synthesis, and techno-economic analysis of ED-based separation processes. The framework employs a building block representation followed by superstructure optimization that is able to automatically generate numerous design solutions and screen the best without requiring prior expert knowledge of candidate configurations. For a given IL as solvent and a set of design specifications, one can automatically determine the feasibility of the solvent and obtain the optimal process flowsheets that correspond to minimum energy consumption, minimum separation cost, or minimum emission/waste. We demonstrate the capability of SPICE_ED for the separation of R-410A (50 wt % R-32 and 50 wt % R-125) using [bmim][PF6], a commonly used IL. Our optimized design requires an equivalent work of only 338.2 kJ/kg R-410A, which is about 48% less than the previously reported value of 656 kJ/kg. The newly identified design also achieves more than 47% and 27% reductions in CO2-equivalent emission (sustainability) and cost, respectively. Through multiobjective optimization, we further identify an operating regime to separate R-410A at a near-minimum cost without significantly increasing the energy consumption and emission. The processes obtained from SPICE_ED show excellent agreement with the key performance metrics when simulated in Aspen Plus, thereby establishing confidence in our designs as realistic and implementable.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.iecr.2c00136.Piecewise approximation of refrigerant's liquid phase specific enthalpy, physical parameters, building block superstructure for full scale optimization, and equipment capital cost functions (PDF)This article has not yet been cited by other publications.

R23/R22 Separation and Recovery Using the DIST-PSA Hybrid System

Extractive Distillation Process Using Organic and Ionic Liquids for the Separation of High-Gwp Refrigerant R410A: A Thermodynamic and Techno-Economic Assessment

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

One-step Removal of Alkynes and Propadiene from Cracking Gases Using a Multi-Functional Molecular Separator

Capture Fluorocarbon and Chlorofluorocarbon from Air Using DUT‐67 for Safety and Semi‐Quantitative Analysis

Further separation of HFC-23 and HCFC-22 by coupling multi-stage PDMS membrane unit to cryogenic distillation

Purification of R-12 for refrigerant reclamation using existing industrial-scale batch distillation: design, optimization, simulation, and experimental studies

Ionic Liquids Based Azeotropic Separation of Refrigerants R410A (R32+R125) and R508B (R23+R116) Through Hybrid Extractive Distillation

Separation Process Synthesis for High-GWP Refrigerant Mixtures: Extractive Distillation using Ionic Liquids

From pore to process: ultra-efficient SF6/N2 continuous separation using inexpensive robust MOF composites

Multicomponent Refrigerant Separation Using Extractive Distillation with Ionic Liquids

Separation of perfluorinated electron specialty gases on microporous carbon adsorbents with record selectivity

Elevated Temperature Pressure Swing Adsorption Process for Reactive Separation of CO/CO2 in H2-rich Gas

Recovery of high-purity NO2 and SO2 products from iron-ore sintering flue gas by distillation: process design, optimization and analysis

Energy-efficient Separation of a Ternary Azeotropic Mixture Via Azeotropic Reflux-Induced Sequences Based on the Intensified Pressure-Swing Distillation

Separation of CO2 and TFE by using diethanolamine and diisopropylamine

CO2/H2 Separation by Synergistic Enhanced Hydrate Method with SDS and R134a

Synergetic thermodynamic/kinetic separation of C3H8/CH3F on carbon adsorbents for ultrapure fluoromethane electronic gas

Investigation on Absorption and Separation Performance of R-32, R-125, R-134a, and R-1234yf Refrigerants Using EMIM-Based Ionic Liquids

Solvent Regeneration by Novel Direct Non-Aqueous Gas Stripping Process for Post-Combustion CO2 Capture

Sustainable design and multi-objective optimization of heat pump assisted extractive distillation process for separating a ternary mixture of methyl acetate, tetrahydrofuran and methanol