Interfacial peeling loads in the TBC with an air hole: Analytical solutions and viscoplasticity modelling

Pengfei Chen,Bo Yuan,Xiaofeng Guo,Yuexi Xiong,Zhiqiang Wan,Wei Sun
DOI: https://doi.org/10.1016/j.ceramint.2022.05.344
IF: 5.532
2022-10-01
Ceramics International
Abstract:This work evaluates the temperature field, stresses, and peeling loads in thermal barrier coatings (TBCs) with air holes subjected to cyclic thermo-mechanical loads during a complete flight. Analytical formulae for the steady-state temperature field and interfacial peeling loads are developed considering thermal gradients in the thickness and longitudinal directions. In addition, viscoplasticity finite element modelling is conducted for the mechanical behaviors of the TBC system. A unified Chaboche-Lemaitre constitutive model that combines a power flow rule with non-linear anisothermal evolution of isotropic and kinematic hardening is integrated into the numerical framework. The results show tensile peeling stress and shear stress are generated in the vicinity of the hole, which motivates the initiation and propagation of hole-edge cracks. The maximum peeling and shear stresses locate close to the thermally grown oxide/bond coat interface and they increase with increasing hole radius. The interfacial peeling moment and shear force could characterize edge cracking in TBCs. As the hole radius increases, the interfacial peeling moment and shear force increase quickly when the hole radius is less than 1 mm but remain stable when the hole radius is beyond 2 mm. This work not only helps to explain the failure mechanisms of hole-edge delamination and spallation in TBCs but also guides the design of thermal barrier coated hot-section components in gas turbines.
materials science, ceramics
What problem does this paper attempt to address?