Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

Simulation the effect of capply layer length on the longitudinal stiffness and lateral stiffness of the tire and the stability of the car

Road-friendliness of interconnected hydro-pneumatic suspension based on ADAMS/Simulink/AMESim

The Application of Sensitivity Method in Vehicle Dynamics Analysis

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

VERIFICATION OF THE SIMULATION MODEL WITH ACTUAL EXPEIMENTATION OF VERTICAL STIFFNESS PASSENGER CAR TIRES UNDER A STATIC LOAD

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

Investigation of tire stiffness and damping coefficients effects on automobile suspension system

Research on simplified tire finite element modeling and simulation method

Computer simulation of tire rolling resistance using finite element method: Effect of linear and nonlinear viscoelastic models

A novel theoretical model of tire in-plane dynamics on uneven roads and its experimental validation

DYNAMIC LOADING EFFECTS ON CAR SUSPENSION COMPONENTS DURING ROAD DRIVING

A Fast and Accurate Tire Model for Vehicle Stability Control Simulation under All Working Conditions

Numberical Analysis on the Steady-State Rolling of Load-Carrying Tire

Modeling and dynamic analysis of a vehicle-flexible pavement coupled system subjected to road surface excitation

Evaluation on Braking Stability of Autonomous Vehicles Running along Curved Sections Based on Asphalt Pavement Adhesion Properties

Simulation Analysis of Tire Dynamic Model

Numerical Simulation of Mechanical Response Analysis of Asphalt Pavement under Dynamic Loads with Non-Uniform Tire-Pavement Contact Stresses

Study of relationship between lateral slip coefficient and indicators of tire linear stiffness

A Two-Dimensional Contact Model Between a Multilayered Solid and a Rigid Cylinder

The modified in-plane rigid-elastic-coupled tire modal model: dynamic response to short wavelength road profiles

Analysis of Vibration Characteristics and Influencing Factors of Complex Tread Pattern Tires Based on Finite Element Method