Abstract:According to Considère necking criterion, enhancing strength of a material will decrease its elongation to failure, i.e. ductility, even if the strain hardening rate remains unchanged. Unfortunately, four traditional strengthening mechanisms including grain refinement, deformation, solid solution and 2 nd -phase particle strengthening increase the yield strength by increasing the critical shear stress for slip initiation and unexceptionally reduce the strain hardening ability and ductility. Recent experiments revealed that implementation of heterostructures can produce extra hetero-deformation induced (HDI) hardening and thus reduce ductility loss while enhancing strength. However, the improved ductility was still less than that of coarse-grained counterparts. Here we fabricated a bulk heterostructured Ti with a uniform multi-modal grain size distribution in which the single individual micro-grain is surrounded and constrained by three-dimensional ultrafine grains. Tensile tests revealed the multi-modal Ti has a high yield strength of 800 MPa, ductility of 28.5%, and outstanding HDI hardening effect compared with its coarse-grained counterparts (a yield strength of 550 MPa and ductility of 26.5%). These mechanical properties of our multi-modal Ti are also superior to other literature reported data of heterostructured Ti. Microstructural characterization further reveals the uniform distribution between hard and soft domains produces maximum interface density and HDI hardening effect. Moreover, the HDI causes extra geometrically necessary dislocations piling ups in the constrained micro-grains, which produce enough and extra strain hardening to maintain and even enhance slightly the ductility. Our work provides a strategy to simultaneously enhance strength and ductility of metals via enough and extra strain hardening capability increase.

A Novel Method to Produce Harmonic Structured Ti with Excellent Compressive Properties

Tailoring A Novel Network Reinforcement Architecture Exploiting Superior Tensile Properties of in Situ Tibw/Ti Composites

Harmonically Structured Ti–6Al–4V Alloy with Ultrahigh Strength Fabricated by Thermomechanical Consolidation of Mechanically Milled TiH2/Al60V40 Powder Blend

Improving strain hardening capacity of high-strength Ti–6Al–4V alloy by a dual harmonic structure

Phase Transformation, Microstructural Evolution and Tensile Properties of a TiH2-Based Powder Metallurgy Pure Titanium

Investigating phase transformation, densification and diffusion mechanism of TiH 2 powder to achieve a high ductile Ti6Al4V alloy

In-situ synthesis and superhigh modulus of network structured TiC/Ti composites based on diamond-Ti system

Towards High Strengthening Efficiency by In-Situ Planting Nano-Tib Networks into Titanium Matrix Composites

Equiaxed Ti-based Composites with High Strength and Large Plasticity Prepared by Sintering and Crystallizing Amorphous Powder

Self-assembled, Aligned TiC Nanoplatelet-Reinforced Titanium Composites with Outstanding Compressive Properties

Structural and Morphological Features of TiNi-Based Powder Manufactured by the Method of Hybrid-Calcium Reduction

Superior strength-ductility synergy by microstructural heterogeneities in pure titanium

Mechanical synthesized nanocrystalline Ti/Al composite powders as precursor for Ti/Al alloy via reactive sintering

Simultaneously enhancing strength and ductility of HCP titanium via multi-modal grain induced extra dislocation hardening

Enhanced strength in pure Ti via design of alternating coarse- and fine-grain layers

Production of a Powder Metallurgical Hot Work Tool Steel with Harmonic Structure by Mechanical Milling and Spark Plasma Sintering

A Novel Method and Mechanism for Simultaneously Refining Microstructure and Controlling Grain Orientation in Ti48Al2Cr2Nb2.5C Alloy

Engineering fine grains, dislocations and precipitates for enhancing the strength of TiB 2 -modified CoCrFeMnNi high-entropy alloy using Laser Powder Bed Fusion

Synthesis and Properties of an Ultrafine Grained Ti-45al-2cr-2nb-1b-0.5ta Alloy Prepared by Double Mechanical Milling and Spark Plasma Sintering

TiB Nano-Whiskers Reinforced Titanium Matrix Composites with Novel Nano-Reticulated Microstructure and High Performance Via Composite Powder by Selective Laser Melting

Mechanical Characterization and Deformation Behavior of Β-Stabilized Ti-Nb-Sn-Cr Alloys