Abstract:Here we proposed a low-cost and high-efficiency strategy for fabricating novel multi-scale gradient-structured/heterogeneous lamella structured (GS/HLS) pure titanium laminates with superior strength-ductility synergy, by temperature-controlled rolling and subsequent annealing of as-sintered multilayered pure titanium foils with preset grain size gradient. A preliminary gradient structure with the average grain size decreasing from the center layer (alternating stacking of equiaxed fine grain bands and elongated grain bands) to the surface layer (equiaxed fine grains) is formed by optimizing the rolling process. Generalized Schmidt factor analysis based on electron backscatter diffraction indicated that there were slip-dominated and twin-dominated grain refinement mechanisms during the rolling process. In addition to the prismatic slip, two kinds of contraction twinning could be activated to achieve the grain refinement in hard domains where slip systems were hard to be activated. After subsequent annealing, equiaxed fine grains in the laminates did not significantly coarsen, while the elongated grains in the center layer had partially merged and grew up into the elongated coarse grains. Thus, the microstructure of the center layer displayed a typical heterogeneous lamella structure composed of alternately stacking of elongated coarse grains and fine grain bands, together with the grain size gradient, a unique multi-scale heterostructured titanium laminate was formed. Tensile test indicated that the as-rolled Ti laminates exhibited extremely high ultimate tensile strength (UTS) of 930 MPa with an acceptable total elongation to fracture (ETF) of 12.3 %, while GS/HLS Ti laminates after annealing at 425 °C possessed a superior combination of high UTS (823 MPa) and high ETF (22.4 %). The main reason was that the annealing treatment significantly reduced the dislocation density in the elongated coarse grains of GS/HLS Ti laminates. This meant that more geometrically necessary dislocations (GNDs) could accumulate in the plastic deformation process, resulting in the hetero-deformation induced (HDI) strengthening and an extra HDI hardening caused by the unique GS/HLS structure, therefore, an excellent strength-ductility synergy of final GS/HLS Ti laminates was achieved.

Simultaneously enhancing strength and ductility of HCP titanium via multi-modal grain induced extra dislocation hardening

Enhancing Ductility of Titanium Matrix Composites by Multimodal Α-Grains

Heterostructures Enhance Simultaneously Strength and Ductility of a Commercial Titanium Alloy

Superior strength-ductility synergy by microstructural heterogeneities in pure titanium

Improving strain hardening capacity of high-strength Ti–6Al–4V alloy by a dual harmonic structure

Enhanced strength in pure Ti via design of alternating coarse- and fine-grain layers

Microstructural Modification and Mechanical Improvement of Ultrafine-Grained Ti Alloy Through Electron Wind Force: an Innovative Approach

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Heterostructured Titanium Composites with Superior Strength-Ductility Synergy Via Controllable Bimodal Grains and <c Plus A> Dislocation Activity

Extraordinary tensile properties of titanium alloy with heterogeneous phase-distribution based on hetero-deformation induced hardening

Achieving Enhanced Tensile Strength-Ductility Synergy Through Phase Modulation in Additively Manufactured Titanium Alloys

Fabrication of heterostructured Ti alloys with exceptional strength and ductility by direct laser deposition

Towards strength-ductility enhancement of titanium matrix composites through heterogeneous grain structured Ti matrix design

Simultaneous enhancement of strength and ductility by combining heterogeneous microstructure and nanoprecipitates

Achieving superior strength-ductility synergy in a unique multi-scale heterostructured titanium laminate fabricated by temperature-controlled rolling and subsequent annealing

A New Strategy for Fabrication of Unique Heterostructured Titanium Laminates and Visually Tracking Their Synchronous Evolution of Strain Partitions Versus Microstructure

Designing ultra-strong and ductile hierarchical titanium alloys via interstitial solute-mediated multi-morphologic α-nanoprecipitates

Loss-free tensile ductility of dual-structure titanium composites via an interdiffusion and self-organization strategy

Heterogeneous Precipitate Microstructure in Titanium Alloys for Simultaneous Improvement of Strength and Ductility

Enhancing Strength-Ductility Synergy in Metastable Β-Ti Alloys Through Β-Subgrains-mediated Hierarchical Α-Precipitation

Introducing β-Ti ductile-zones for enhancing both strength and ductility in heterostructured titanium alloy composites