Abstract:In this study, the graded hierarchical hexagonal honeycomb (GHHH) integrating gradient design and hierarchical design was fabricated using the 3D-printing technique, and its in-plane elastic properties were investigated theoretically, experimentally, and numerically. Theoretical solutions were developed based on the Euler beam theory to predict the effective elastic modulus and Poisson's ratio of GHHH, and theoretical values were in good agreement with the experimental and numerical results. The effect of gradient design and hierarchical design on the in-plane elastic properties of GHHH was also analyzed and compared. Results showed that the hierarchical design has a more significant effect on Poisson's ratio and adjusting the internal forces of GHHH compared with the gradient design. In addition, it was found that GHHH exhibited higher stiffness compared with regular hexagonal honeycomb (RHH), graded hexagonal honeycomb (GHH), and vertex-based hierarchical hexagonal honeycomb (VHHH) under the constraint of the same relative density, respectively. Specifically, the effective elastic modulus of GHHH can be enhanced by 119.82% compared to that of RHH. This research will help to reveal the effect of integrating hierarchical design and gradient design on the in-plane elastic properties of honeycombs.

What problem does this paper attempt to address?

The problem this paper attempts to address is: studying the in-plane elastic properties of 3D printed graded hierarchical hexagonal honeycomb structures (GHHH) that combine gradient design and hierarchical design. Specifically, the authors explore the effective elastic modulus and Poisson's ratio of GHHH through theoretical analysis, experimental testing, and numerical simulation, and analyze the impact of gradient design and hierarchical design on the in-plane elastic properties of GHHH. ### Main Research Content: 1. **Geometric Description**: - Introduced the geometric configuration of GHHH, including the construction methods of vertex-based hierarchical hexagonal honeycomb (VHHH) and graded hexagonal honeycomb (GHH). - Defined hierarchical structure parameter λ and gradient parameter k to describe the geometric configuration and material distribution of GHHH. 2. **Theoretical Analysis**: - Derived the theoretical solutions for the effective elastic modulus and Poisson's ratio of GHHH based on Euler beam theory. - Calculated the strain energy of a unit cell using Castigliano's second theorem by establishing a mechanical model of GHHH sub-assemblies. 3. **Experimental Testing**: - Manufactured GHHH samples using the Fused Deposition Modeling (FDM) method. - Conducted quasi-static compression experiments to measure the effective elastic modulus of GHHH. 4. **Numerical Simulation**: - Performed numerical simulations using finite element software ABAQUS/Standard 6.14-4 to validate the experimental results. - Simulated the in-plane loading process of GHHH to calculate the effective elastic modulus and Poisson's ratio. ### Research Objectives: - To reveal the impact of combining gradient design and hierarchical design on the in-plane elastic properties of honeycomb structures. - To evaluate the stiffness and energy absorption capacity of GHHH at the same relative density, comparing it with regular hexagonal honeycomb (RHH), graded hexagonal honeycomb (GHH), and vertex-based hierarchical hexagonal honeycomb (VHHH). ### Research Significance: - Provides new ideas for designing lightweight materials with excellent mechanical properties. - Promotes the application of gradient design and hierarchical design in complex geometric structures, especially in additive manufacturing technology. Through these studies, the authors hope to reveal the comprehensive impact of combining gradient design and hierarchical design on the in-plane elastic properties of honeycomb structures, providing theoretical basis and technical support for future design and applications.

In-Plane Elastic Properties of 3D-Printed Graded Hierarchical Hexagonal Honeycombs

Mechanical Behavior of 3D-Printed Thickness Gradient Honeycomb Structures

Mechanical Properties and Energy Absorption of 3D Printed Square Hierarchical Honeycombs under In-Plane Axial Compression

Hybrid hierarchical square honeycomb with widely tailorable effective in-plane elastic modulus

Enhanced Out-Of-Plane Crushing Strength and Energy Absorption of In-Plane Graded Honeycombs

Modelling and characterization of novel honeycomb structures with mass gradient produced by additive manufacturing

Modularizing honeycombs for enhancement of strength and energy absorption

Equivalent In-Plane Elastic Moduli of Honeycomb Materials under Hypergravity Conditions

Mechanical Properties and Energy Absorption of 3D Printed Double-Layered Helix Honeycomb under In-Plane Compression

Graded honeycombs with high impact resistance through machine learning-based optimization

Dynamic Crushing Behaviors of Multi-Layered Gradient Honeycombs with Different Poisson’s Ratios: A Finite Element Simulation

Mechanical properties of additively manufactured octagonal honeycombs

A New Type of Hierarchical Honeycomb in-Plane Impact Study

3D printed self-similar AlSi10Mg alloy hierarchical honeycomb architectures under in-plane large deformation

In-plane and out-of-plane compressive properties of regular and graded cellular cores of sandwich panels fabricated by additive manufacturing

In‐Plane Crashworthiness of Gradient Curved‐Walled Honeycombs: Experimental, Numerical Simulation, and Theoretical Analysis

3D-printed thermoplastic polyurethane/polyvinylidene fluoride gradient stiffness and hierarchical cellular structures with tailored energy absorption behavior

In-plane dynamic crushing of re-entrant triangular honeycomb with gradient thickness

Load characteristics of triangular honeycomb structures with self-similar hierarchical features

Design 3D improved star-shaped honeycomb with different tip angles from 2D analytical star-shaped model

In-plane crushing behaviour of hierarchical honeycombs: finite element simulation and analytical modelling