Abstract:In order to enhance the energy absorption capacity of the honeycomb structure, a novel self-similar hierarchical honeycomb is proposed by adding smaller hexagons in the center and the vertex position of the hexagonal honeycomb (HH), and therefore named as center-vertex honeycomb (CVH). An analytical model is built to investigate the in-plane crushing responses of the newly proposed honeycomb, which is in good agreement with the simulation and experimental results. The in-plane quasi-static compression characteristics and energy absorption capabilities of CVH are investigated systematically by finite element method and are compared with that of HH and other hierarchical honeycombs. Two plateau stress regions in the stress–strain curves of CVH are found under the quasi-static compression, and the second plateau stress is over three times higher than the first one. In order to understand the strengthening mechanism clearly, stable unicellular deformation and global modes are revealed. Two typical plateau stress are deduced theoretically based on the collapse modes to achieve performance prediction, which are respectively decided by the hexagonal structures located on both sides and the six vertexes of the representative unit cell. The results show that CVH can absorb much more energy than HH and the vertex-based hierarchical structure with the same masses under quasi-static compression. Furthermore, a parametric study is performed to explore the influence of the impact velocity, the order number, and the wall thickness on the plateau stress, specific energy absorption, and collapse deformation modes of CVH. It can be concluded that CVH is a better choice for energy absorption. The present study provides significant suggestions and guidance for the design-oriented multi-stage energy absorbing reinforced honeycomb structure with special functions.

Hybrid hierarchical square honeycomb with widely tailorable effective in-plane elastic modulus

Out-of-plane Crushing Behavior of Hybrid Hierarchical Square Honeycombs

In-Plane Elastic Properties of 3D-Printed Graded Hierarchical Hexagonal Honeycombs

In-plane Stiffness of the Anisotropic Multifunctional Hierarchical Honeycombs

Machine Learning Assisted Prediction and Analysis of In-Plane Elastic Modulus of Hybrid Hierarchical Square Honeycombs

The Effect of Material Distribution on the Out-of-plane Elastic Properties of Hierarchical Diamond Honeycombs

A New Type of Hierarchical Honeycomb in-Plane Impact Study

Mechanical Properties and Energy Absorption of 3D Printed Square Hierarchical Honeycombs under In-Plane Axial Compression

Out-of-plane Mechanical Design of Bi-Directional Hierarchical Honeycombs

In-plane compressive behavior of a novel self-similar hierarchical honeycomb with design-oriented crashworthiness

Dynamic Crushing Strength Analysis of Auxetic Honeycombs

Out-of-plane Mechanical Behaviors of a Side Hierarchical Honeycomb

The Effective Elastic Properties of Flexible Hexagonal Honeycomb Cores with Consideration for Geometric Nonlinearity

Out-of-plane dynamic crushing behavior of joint-based hierarchical honeycombs

In-Plane Dynamic Crushing Behaviors of a Vertex-Based Hierarchical Auxetic Honeycomb

Analytical homogenization for equivalent in-plane elastic moduli of honeycomb structures with stiffened joints

Mechanical Reinforcement Mechanism of a Hierarchical Kagome Honeycomb

A Novel Auxetic Honeycomb with Enhanced In-Plane Stiffness and Buckling Strength

Negative Poisson's ratio and effective Young's modulus of a vertex-based hierarchical re-entrant honeycomb structure

Design 3D improved star-shaped honeycomb with different tip angles from 2D analytical star-shaped model

In-plane crushing behaviour of hierarchical honeycombs: finite element simulation and analytical modelling