Abstract:The quasi-static crushing behavior of aluminum honeycomb materials is thoroughly evaluated using a combined experimental, analytical, and numerical approach. Based on experimental characterization, the constitutive properties of the honeycomb cores under flat-wise compression are approximated by an elastic perfectly plastic material with inclusion of hardening after densification. Two different cell size materials are tested and compared, and the effect of strain rate on the crushing stress is studied. The experimental results show that the crushing platen stress is directly related to the relative density of core materials, and it can be associated with the strain rate, even though the effect of strain rates is not so dominant based on the conducted quasi-static tests. A simple physical model for predicting the crushing wave length and stress is proposed and compared with the experimental data and available formulas in the literature. It is observed that the crushing wave length is close to the cell size and related to the geometric dimension and strain rate. The folding mechanism is also measured by the ARAMIS system (a photogrammetry technique), and the measured von Mises strains are compared with the numerical results from LS-DYNA, demonstrating that the folding mechanism is initiated by two plastic hinge lines formed at the cell corners. Multilayer effect is also investigated, and it indicates that including the second layer slightly decreases the maximal crushing stress, but the simple superposition is still applicable for crushing multilayer honeycomb cores with different density. Partial crushing due to small size cylindrical indenter is further studied, and the experiment shows that the partial crushing process can be described by an elastic—plastic hardening material. Side impact process of honeycomb materials is also investigated, and the collapse band and its propagation process are captured. The thorough characterization of core crushing behavior conducted in this study provides better understanding of the failure process of honeycomb materials and can be further employed to study energy absorption and impact response of sandwich structures.

3D printed self-similar AlSi10Mg alloy hierarchical honeycomb architectures under in-plane large deformation

Plastic Crushing Failure of Bio-Inspired Cellular Hierarchical Topological Sandwich Core

Out-of-plane Mechanical Design of Bi-Directional Hierarchical Honeycombs

Fabrication and mechanical properties of three- dimensional enhanced TiAl/GH3536 hetero- honeycomb sandwich structure

Metallic tube-reinforced aluminum honeycombs: Compressive and bending performances

Load characteristics of triangular honeycomb structures with self-similar hierarchical features

Mechanical Performance of Bio-Inspired Hierarchical Honeycomb Metamaterials

In-plane Compression Behavior of Hybrid Honeycomb Metastructures: Theoretical and Experimental Studies

Mechanical Properties and Energy Absorption of 3D Printed Square Hierarchical Honeycombs under In-Plane Axial Compression

Modularizing honeycombs for enhancement of strength and energy absorption

Out-of-plane crashworthiness of bio-inspired self-similar regular hierarchical honeycombs

Mechanical Behavior of 3D-Printed Thickness Gradient Honeycomb Structures

Mechanical Properties and Energy Absorption of 3D Printed Double-Layered Helix Honeycomb under In-Plane Compression

In-plane Compression of 3D-Printed Self-Similar Hierarchical Honeycombs – Static and Dynamic Analysis

Bio-inspired Hierarchical Honeycomb Metastructures with Superior Mechanical Properties

Quasi-static Crushing Behavior of Aluminum Honeycomb Materials

On Hierarchical Honeycombs under Out-of-plane Crushing

Local Strengthening Design and Compressive Behavior Study of the Triangular Honeycomb Structure

Superior compressive performance of hierarchical origami-corrugation metallic sandwich structures based on selective laser melting

Bending Behavior Of Sandwich Beam With Tailored Hierarchical Honeycomb Cores

Deformation Behavior of Heterogeneous Multi-Morphology Lattice Core Hybrid Structures