Abstract:Circular honeycombs have been widely used in many fields due to their excellent mechanical properties recently, however, circular honeycombs with different arrangements have been rarely studied. In this paper, two circular honeycombs with different arrangements were designed and fabricated using a 3D printer. Both honeycombs were investigated by experiment and finite element (FE) analysis to compare their performance. It is worth noting that both honeycombs possess the same relative density. The accuracy of the FE models was validated by comparing them with experimental results and relevant reports. Subsequently, a series of numerical studies were conducted to analyse the in-plane dynamic crushing behaviour and energy absorption characteristics at different impact velocities. Based on different experiment deformation modes were identified from the observation of results respectively. Additionally, continuous circle honeycomb (CCH) exhibits a higher reaction force but is prone to fracture. On the other hand, spacing circle honeycomb (SCH) possesses a lower reaction force but offers greater stability due to its ability to flex and release force. As a result, SCH can effectively absorb energy and demonstrates superior crushing capacity compared to CCH. To investigate and compare the plateau stress and energy absorption of these honeycombs, the FE method was used, which also involved a detailed analysis of the impact velocity and relative density of the honeycomb. It was observed that the crushing stress and energy absorption of SCH were higher than those of CCH with the same impact velocity and relative density. According to the one dimensional shock wave theory, empirical formulas for two circular honeycombs to predict the plateau stress are given respectively with the maximum error lower than 12%. This paper aims to offer valuable insights for the design of different configurations, with the goal of improving the crashworthiness and energy absorption capacity of a specific honeycomb structure.

Dynamic Crushing Behaviors of Multi-Layered Gradient Honeycombs with Different Poisson’s Ratios: A Finite Element Simulation

In-plane Dynamics Crushing of a Combined Auxetic Honeycomb with Negative Poisson's Ratio and Enhanced Energy Absorption

In-plane Dynamic Crushing of a Novel Bio-Inspired Re-Entrant Honeycomb with Negative Poisson's Ratio

In-plane dynamic response and multi-objective optimization of negative Poisson's ratio (NPR) honeycomb structures with sinusoidal curve

In-plane crushing response and energy absorption of two different arranged circular honeycombs

Insight into the Negative Poisson’s Ratio Effect of the Gradient Auxetic Reentrant Honeycombs

In-plane dynamic crushing of re-entrant triangular honeycomb with gradient thickness

Numerical analysis of impact resistance of honeycomb structures with different Poisson's ratios

Dynamic crushing behaviors and enhanced energy absorption of bio-inspired hierarchical honeycombs with different topologies

In-plane compressive behavior of a novel self-similar hierarchical honeycomb with design-oriented crashworthiness

Enhanced Out-Of-Plane Crushing Strength and Energy Absorption of In-Plane Graded Honeycombs

Dynamic Response and Energy Absorption Characteristics of a Three-Dimensional Re-Entrant Honeycomb

In-plane crushing response of a novel bidirectional re-entrant honeycomb with two plateau stress regions

A Nonlinear Repeated Impact Model of Auxetic Honeycomb Structures Considering Geometric Nonlinearity and Tensile/compressive Deformation

Crashworthiness Analysis and Multi-Objective Optimization for Concave I-Shaped Honeycomb Structure

Graded honeycombs with high impact resistance through machine learning-based optimization

Out-of-plane dynamic crushing behavior of joint-based hierarchical honeycombs

Crashworthiness analysis and multi-objective optimization for honeycomb structures under oblique impact loading

Experimental and numerical analysis of a bolted reinforced honeycomb with tunable Poisson's ratio

A New Type of Hierarchical Honeycomb in-Plane Impact Study

In-plane impact dynamics of honeycomb structure containing curved reentrant sides with negative Poisson’s ratio effect