Abstract:Abstract Scale-up studies of fluidized beds are important for numerous fields. Fluidization in a multi-ring inclined nozzle spout-fluid bed (MRIN spout-fluid bed) is one of the most critical factors that affect the coating efficiency and uniformity of tri-structural isotropic (TRISO) nuclear particles in the fluidized bed chemical vapor deposition (FB-CVD) process. In this work, the flow pattern similarity principle was proposed to scale up a specially designed spout-fluid bed, which was aimed at maintaining the gas-solid contact efficiency, and was validated by electrical capacitance tomography (ECT) measurements. First, the traditional ECT method was developed for the specially designed MRIN spout-fluid bed according to the filling method. Then, the reconstruction algorithms were updated using the alternating direction multiplier method (ADMM) by introducing optimization constraints. The fluidization laws were investigated for different superficial gas velocities and distributor structures. We found that the gas distributor structure affected the merge point of the jets, which played an essential role in fluidization pattern changes. The statistically-based coefficient of variation (Cv) was proposed to distinguish the different flow patterns. Multi-ring spouting was then selected as a typical flow pattern for good fluidization and mixing, where the Cv ranged from 0.25 to 0.65. Then, the optimal design principles for the enlarged spout-fluid bed gas distributor were obtained. We determined that a smaller nozzle diameter (0.71 d 0 ), larger nozzle spacing (1.12 x 0 ), and slightly inclined angle (1.50 θ 0 ) could improve fluidization, and that nozzle spacing was the most important factor. This study may be beneficial for the industrial design of the FB-CVD process and for the fabrication of high-density nuclear fuel particles. Additionally, it could be presented to a more general audience for scaling-up fluidized beds with a complex distributor, which would be beneficial for the fluidization research community.

A numerical scale-up study of annular fluidized bed reactor with high centrifugal acceleration

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

An Experimental Study on Aerodynamic Characteristics of Hypergravity Centrifugal Facility

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Experimental study on the scale-up of a multi-ring inclined nozzle spout-fluid bed by electrical capacitance tomography

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review

Optimizing injection modes and reactor shapes in gas-particle fluidized beds using a mesoscale CFD model

Simulation of the Behavior of Gas-Solid Flow in a Novel Rotating Fluidized Bed in a Static Geometry

Study on velocity fields of rotating disc contactor with different scales by computational fluid dynamics

Scale-Up Study on the Performance of Annular Pulsed Disc-And-Doughnut Columns

Computational fluid dynamic simulation of fluid flow in a rotating packed bed

Numerical Simulation of Scale-Up Effects of Methanol-to-olefins Fluidized Bed Reactors

Using Mesoscale Drag Model-Augmented Coarse-Grid Simulation to Design Fluidized Bed Reactor: Effect of Bed Internals and Sizes

Numerical studies of gas-solid flow behaviors and wall wear in a swirling fluidized bed