Abstract:Solid electrolytes have gained attention recently for the development of next-generation Li-ion batteries since they can fundamentally improve the battery stability and safety. Among various types of solid electrolytes, composite solid electrolytes (CSEs) exhibit both high ionic conductivity and excellent interfacial contact with the electrodes. Incorporating active nanofibers into the polymer matrix demonstrates an effective method to fabricate CSEs. However, current CSEs based on traditional poly(ethylene oxide) (PEO) polymer suffer from the poor ionic conductivity of PEO and agglomeration effect of inorganic fillers at high concentrations, which limit further improvements in Li+ conductivity and electrochemical stability. Herein, we synthesize a novel PEO based cross-linked polymer (CLP) as the polymer matrix with naturally amorphous structure and high room-temperature ionic conductivity of 2.40 × 10−4 S cm−1. Li0.3La0.557TiO3 (LLTO) nanofibers are incorporated into the CLP matrix to form composite solid electrolytes, achieving enhanced ionic conductivity without showing filler agglomeration. The high content of Li-conductive nanofibers improves the mechanical strength, ensures the conductive network, and increases the total Li+ conductivity to 3.31 × 10−4 S cm−1. The all-solid-state Li|LiFePO4 batteries with LLTO nanofiber-incorporated CSEs are able to deliver attractive specific capacity of 147 mAh g−1 at room temperature, and no evident dendrite is found at the anode/electrolyte interface after 100 cycles.Graphic AbstractA highly ionic-conductive 3-D fiber network composite solid electrolyte is introduced based on Li-ion conducting nanofibers and amorphous poly(ethylene oxide) (PEO) cross-linked polymer. With the reinforcement of Li0.3La0.557TiO3 (LLTO) nanofibers, the continuous 3D conduction network formed within the polymer matrix greatly enhances the electrochemical and mechanical properties of resultant composite solid electrolytes. Consequently, the lithium dendrite is effectively controlled after long cycles, and the all-solid-state Li|LiFePO4 prototype cells demonstrate excellent cycling stability at room temperature.

Polymer-based LFP cathode/current collector microfiber-meshes with bi- and interlayered architectures for Li-ion battery

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

Resource-efficient electrodes with metallized woven-glass-grid current collectors for lithium-ion batteries

Resource‐efficient electrodes with metallized woven‐glass‐grid current collectors for lithium‐ion batteries

High Areal Capacity Si/LiCoO2 Batteries from Electrospun Composite Fiber Mats

Enabling interfacial stability via 3D networking single ion conducting nano fiber electrolyte for high performance lithium metal batteries

Cellulose Mesh Supported Ultrathin Ceramic-Based Composite Electrolyte for High-Performance Li Metal Batteries

Braided Fiber Current Collectors for High‐Energy‐Density Fiber Lithium‐Ion Batteries

High-Performance 3-D Fiber Network Composite Electrolyte Enabled with Li-Ion Conducting Nanofibers and Amorphous PEO-Based Cross-Linked Polymer for Ambient All-Solid-State Lithium-Metal Batteries

Incorporation of LiF into functionalized polymer fiber networks enabling high capacity and high rate cycling of lithium metal composite anodes

Fabrication of Composite Gel Electrolyte and F-Doping Carbon/Silica Anode from Electro-Spun P(VDF-HFP)/Silica Composite Nanofiber Film for Advanced Lithium-Ion Batteries

High-performance fiber-shaped Li-ion battery enabled by a surface-reinforced self-supporting electrode

Aligned carbon fibers–carbon nanotube–polymer–based composite as lithium-ion battery current collector

Flexible Composite Electrolyte Membranes with Fast Ion Transport Channels for Solid-State Lithium Batteries

Lithium Manganese Aluminum Oxide-Based Full Li-ion Battery Using Carbon Fibers As Current Collectors

Metallized Plastic Foils: A Promising Solution for High‐Energy Lithium‐Ion Battery Current Collectors

Lithium iron phosphate cathode supported solid lithium batteries with dual composite solid electrolytes enabling high energy density and stable cyclability

Tailor-Made Electrospun Multilayer Composite Polymer Electrolytes for High-Performance Lithium Polymer Batteries

Enabling high-performance lithium iron phosphate cathodes through an interconnected carbon network for practical and high-energy lithium-ion batteries

Flexible and crosslinking electrospun porous carbon nanofiber membranes as freestanding binder-free anodes for lithium-ion batteries

Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes.