Abstract:Energy storage devices with high power and energy density are in demand owing to the rapidly growing population, and lithium-ion batteries (LIBs) are promising rechargeable energy storage devices. However, there are many issues associated with the development of electrode materials with a high theoretical capacity, which need to be addressed before their commercialization. Extensive research has focused on the modification and structural design of electrode materials, which are usually expensive and sophisticated. Besides, polymer binders are pivotal components for maintaining the structural integrity and stability of electrodes in LIBs. Polyvinylidene difluoride (PVDF) is a commercial binder with superior electrochemical stability, but its poor adhesion, insufficient mechanical properties, and low electronic and ionic conductivity hinder its wide application as a high-capacity electrode material. In this review, we highlight the recent progress in developing different polymeric materials (based on natural polymers and synthetic non-conductive and electronically conductive polymers) as binders for the anodes and cathodes in LIBs. The influence of the mechanical, adhesion, and self-healing properties as well as electronic and ionic conductivity of polymers on the capacity, capacity retention, rate performance and cycling life of batteries is discussed. Firstly, we analyze the failure mechanisms of binders based on the operation principle of lithium-ion batteries, introducing two models of "interface failure" and "degradation failure". More importantly, we propose several binder parameters applicable to most lithium-ion batteries and systematically consider and summarize the relationships between the chemical structure and properties of the binder at the molecular level. Subsequently, we select silicon and sulfur active electrode materials as examples to discuss the design principles of the binder from a molecular structure point of view. Finally, we present our perspectives on the development directions of binders for next-generation high-energy-density lithium-ion batteries. We hope that this review will guide researchers in the further design of novel efficient binders for lithium-ion batteries at the molecular level, especially for high energy density electrode materials.

Metallized Plastic Foils: A Promising Solution for High‐Energy Lithium‐Ion Battery Current Collectors

Metallized Plastic Foils: A Promising Solution for High‐Energy Lithium‐Ion Battery Current Collectors (Adv. Energy Mater. 36/2023)

Study on the Commercial Metalized Plastic Current Collector PET‐Cu and PP‐Cu Toward High‐Energy Lithium‐Ion Battery

Composite Copper Foil Current Collectors with Sandwich Structure for High-Energy Density and Safe Lithium-Ion Batteries

A Lightweight Carbon-Incorporated Polymer Current Collector for Improving the Performance and Safety of Lithium-Ion Batteries

High Performance Composite Polymer Electrolytes for Lithium‐Ion Batteries

Advancements in Current Collectors for Composite Lithium Metal Anodes

Achievements, challenges, and perspectives in the design of polymer binders for advanced lithium-ion batteries

Engineering Polymer-Based Porous Membrane for Sustainable Lithium-Ion Battery Separators

Metal‐Free Polymer‐Based Current Collector for High Energy Density Lithium‐Metal Batteries

Polyethylene terephthalate-based cathode current collectors coated by ultrathin aluminum metal layers for commercial lithium-ion batteries with high security and long-term cycling stability

Polymers in Lithium‐Ion and Lithium Metal Batteries

Polymers for advanced lithium-ion batteries: State of the art and future needs on polymers for the different battery components

Stretchable Separator/Current Collector Composite for Superior Battery Safety

Recent Progress of Porous Materials in Lithium‐Metal Batteries

Stable Lithium Electrodeposition at Ultra‐High Current Densities Enabled by 3D PMF/Li Composite Anode

Copper Polypropylene Metal Plastic Composite Copper Foil: Future-Proof Anode Current Collector Solution for Lithium-Ion Batteries with High Energy Density

Polymer Based Multi-Layer Al Composite Current Collector Improves Battery Safety

Porous Metal Current Collectors for Alkali Metal Batteries

Polymer Electrolytes for High Energy Density Ternary Cathode Material-Based Lithium Batteries

Facile Polymer of Intrinsic Microporosity-Modified Separator with Quite-Low Loading for Enhanced-Performance Lithium Metal Batteries