Abstract:Solid electrolytes have gained attention recently for the development of next-generation Li-ion batteries since they can fundamentally improve the battery stability and safety. Among various types of solid electrolytes, composite solid electrolytes (CSEs) exhibit both high ionic conductivity and excellent interfacial contact with the electrodes. Incorporating active nanofibers into the polymer matrix demonstrates an effective method to fabricate CSEs. However, current CSEs based on traditional poly(ethylene oxide) (PEO) polymer suffer from the poor ionic conductivity of PEO and agglomeration effect of inorganic fillers at high concentrations, which limit further improvements in Li+ conductivity and electrochemical stability. Herein, we synthesize a novel PEO based cross-linked polymer (CLP) as the polymer matrix with naturally amorphous structure and high room-temperature ionic conductivity of 2.40 × 10−4 S cm−1. Li0.3La0.557TiO3 (LLTO) nanofibers are incorporated into the CLP matrix to form composite solid electrolytes, achieving enhanced ionic conductivity without showing filler agglomeration. The high content of Li-conductive nanofibers improves the mechanical strength, ensures the conductive network, and increases the total Li+ conductivity to 3.31 × 10−4 S cm−1. The all-solid-state Li|LiFePO4 batteries with LLTO nanofiber-incorporated CSEs are able to deliver attractive specific capacity of 147 mAh g−1 at room temperature, and no evident dendrite is found at the anode/electrolyte interface after 100 cycles.Graphic AbstractA highly ionic-conductive 3-D fiber network composite solid electrolyte is introduced based on Li-ion conducting nanofibers and amorphous poly(ethylene oxide) (PEO) cross-linked polymer. With the reinforcement of Li0.3La0.557TiO3 (LLTO) nanofibers, the continuous 3D conduction network formed within the polymer matrix greatly enhances the electrochemical and mechanical properties of resultant composite solid electrolytes. Consequently, the lithium dendrite is effectively controlled after long cycles, and the all-solid-state Li|LiFePO4 prototype cells demonstrate excellent cycling stability at room temperature.

High-performance fiber-shaped Li-ion battery enabled by a surface-reinforced self-supporting electrode

Cellulose-based high-loading flexible electrode for lithium-ion battery with high volumetric energy density

Scalable Self-Assembly of Composite Nanofibers into High-Energy-Density Li-Ion Battery Electrodes

Interface-reinforced high-capacity fiber cathode for wearable Li-S batteries

Constructing Robust LiF‐Enriched Interfaces in High‐Voltage Solid‐State Lithium Batteries Utilizing Tailored Oriented Ceramic Fiber Electrolytes

Densifiable Ink Extrusion for Roll-To-Roll Fiber Lithium-Ion Batteries with Ultra-High Linear and Volumetric Energy Densities

Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes.

High-energy-density fiber-shaped aqueous Ni//Fe battery enabled by metal-organic framework derived spindle-like carbon incorporated iron disulfide

High-Performance 3-D Fiber Network Composite Electrolyte Enabled with Li-Ion Conducting Nanofibers and Amorphous PEO-Based Cross-Linked Polymer for Ambient All-Solid-State Lithium-Metal Batteries

High Performance Flexible Lithium‐Ion Battery Electrodes: Ion Exchange Assisted Fabrication of Carbon Coated Nickel Oxide Nanosheet Arrays on Carbon Cloth

Direct ink writing preparation of LiFePO4/MWCNTs electrodes with high-areal Li-ion capacity

A fiber-shaped aqueous lithium ion battery with high power density

Ultrathin inorganic-organic solid-state electrolyte reinforced by a pre-fiberized LAGP continuous skeleton

A Rationally Assembled Graphene Nanoribbon/graphene Framework for High Volumetric Energy and Power Density Li-ion Batteries

Incorporation of LiF into functionalized polymer fiber networks enabling high capacity and high rate cycling of lithium metal composite anodes

A Silica‐Aerogel‐Reinforced Composite Polymer Electrolyte with High Ionic Conductivity and High Modulus

Nanoflowers-like LiTi2(PO4)3 on Carbon Nanotube Fibers As Novel Binder-Free Anodes for High-Performance Fiber-Shaped Aqueous Rechargeable Lithium-Ion Batteries

Three-dimensional Polyimide Nanofiber Framework Reinforced Polymer Electrolyte for All-Solid-state Lithium Metal Battery

Regulating Li-ion flux via engineering oxidized ZIF-8/polyacrylonitrile fiber interlayer for Li metal batteries with high performance

Construction of Hierarchical Surface on Carbon Fiber Paper for Lithium Metal Batteries with Superior Stability

Functional Laminated Fiber Scaffold Based on Titanium Monoxide for Lithium Metal‐Based Batteries