Abstract:Dramatic development in perovskite solar cells (PSCs) and the widespread application of wearable electronics have attracted extensive research in the area of large-scale flexible solar power sources based on PSCs. Manufacturing of flexible PSCs by printing is considered to be one of the most potential methods. However, it is still a great challenge to print large-area uniform hole transport layers (HTLs) on a rough and soft plastic substrate to achieve flexible PSCs with high efficiency and good stability. Herein, we synthesized a viscous poly(3,4-ethylene dioxythiophene):graphene oxide (PEDOT:GO) gel and then blade-coated the gel by high-speed shearing to achieve high-quality HTLs with scalable size. The glued HTLs exhibit high viscosity, electrical conductivity, and mechanical flexibility, which enhance the adhesive ability and protect the brittle ITO electrode and perovskite crystals. Due to the gelatinous HTLs, we achieved an optimal efficiency of the flexible PSCs (1.01 cm2) of 19.7%, while that of the large-area flexible perovskite module (25 cm2) exceeded 10%. This is the highest efficiency for reported flexible MAPbI3 PSCs (1.01 cm2). Furthermore, the efficiency retention of the PSCs remains over 85% after 5000 bending cycles, which is of great significance for the practical application of PSCs in portable and wearable electronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00813?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00813</a>.The optical picture and rheological properties of PEDOT:PSS and GO composites ink with three different combined conditions of ultrasonication, stirring, and ultrasonication disruption; rheological properties of the solution after adding different proportions of GO (1–20 mg mL–1); temperature-dependent viscoelasticity and the viscous properties of the PEDOT:GO gel; transmittance spectra, X-ray photoelectron spectroscopy (XPS) spectra S 2p, ultraviolet photoelectron spectroscopy (UPS), and the sheet resistance of GO, PEDOT:PSS, and PEDOT:GO three HTLs; optical and AFM microscopic morphology of the large-area PEDOT:GO gel interface layer (4 × 4 cm2) blade coating on the PET film; surface SEM images, grain size distribution, 2D X-ray diffraction (2D-XRD), and steady-state PL spectra of perovskite films on GO, PEDOT:PSS, and PEDOT:GO interface layers; SEM images of GO, PEDOT:PSS, and PEDOT:GO three HTLs, the MAPbI3 films and the corresponding sheet resistance change bent with 3000 cycles within a curvature radius form flat to 5 mm; finite-elements simulation model, the stress distribution of each layer, and the Young's modulus of the flexible PSCs with PEDOT:PSS and PEDOT:GO interface layer; J–V curves of the PSCs based on GO HTLs; long-term stability of flexible PSCs based on three HTLs (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00813/suppl_file/am1c00813_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly flexible and transparent colorless polyimide substrate sandwiched between plasma polymerized fluorocarbon and InGaTiO for high performance flexible perovskite solar cells

Multicoated Flexible Indium Tin Oxide Electrodes Fabricated Using Magnetron Sputtering and Arc Plasma Ion Plating for Flexible Perovskite Solar Cells

Ultra-Thin Perovskite Solar Cells with High Specific Power Density Based on Colorless Polyimide Substrates

High‐Performance Flexible Perovskite Solar Cells via Precise Control of Electron Transport Layer

Porous Lead Iodide Layer Promotes Organic Amine Salt Diffusion to Achieve High Performance p‐i‐n Flexible Perovskite Solar Cells

Development of Lightweight and Flexible Perovskite Solar Cells on Ultrathin Colorless Polyimide Foils

Highly flexible, robust, stable and high efficiency perovskite solar cells enabled by van der Waals epitaxy on mica substrate

Optically and Mechanically Engineered Anti‐Reflective Film for Highly Efficient Rigid and Flexible Perovskite Solar Cells

Highly Transparent and Colorless Nanocellulose/Polyimide Substrates with Enhanced Thermal and Mechanical Properties for Flexible OLED Displays

Ultrathin Flexible Transparent Composite Electrode via Semi-embedding Silver Nanowires in a Colorless Polyimide for High-Performance Ultraflexible Organic Solar Cells

High performance of low-temperature processed perovskite solar cells based on a polyelectrolyte interfacial layer of PEI

SnO2 Surface Modification and Perovskite Buried Interface Passivation by 2,5‐Furandicarboxylic Acid for Flexible Perovskite Solar Cells

Mechanically Robust and Flexible Perovskite Solar Cells via a Printable and Gelatinous Interface

Selective Chemical Etching to Remove 0D Cs4Pb(IBr)6 from Mixed‐Dimensional Perovskite Surface Achieving High Efficiency Flexible All‐Inorganic Perovskite Solar Cells with Superior Mechanical Durability

Surface Plasmon‐Assisted Transparent Conductive Electrode for Flexible Perovskite Solar Cells

Pyrophosphate interlayer improves performance of semi-transparent perovskite solar cells

Thermally Stable and Transparent Polyimide Derived from Side‐Group‐Regulated Spirobifluorene Unit for Substrate Application

2D Perovskite Seeds Enabled High-Quality Perovskite Films with Facet Orientation and Released Stresses on Flexible Substrates

Fully printed flexible perovskite solar modules with improved energy alignment by tin oxide surface modification

Scalable Flexible Perovskite Solar Cells Based on a Crystalline and Printable Template with Intelligent Temperature Sensitivity

Fapbi(3) Flexible Solar Cells With A Record Efficiency Of 19.38% Fabricated In Air Via Ligand And Additive Synergetic Process