Abstract:Interface engineering has been recognized as a very effective method to simultaneously improve both efficiency and stability in perovskite solar cells (PSCs). In this work, we report using an excellent small molecular material tetraphenyldibenzoperiflanthene (DBP) to modify the perovskite/Spiro-OMeTAD interface to achieve significantly improved solar cell performance. It is found that the ultrathin DBP interlayer accelerates hole transfer across the FAxMA1–xPbInBr3–n/Spiro-OMeTAD interface and effectively reduces the nonradiative recombination. The Kelvin probe force microscopy and energy band analyses reveal that the DBP modification helps build better matched energy level alignment and smaller energy loss for more fluent hole transport. Consequently, the DBP-treated PSCs achieve an enhanced open-circuit voltage as high as 1.184 V and fill factor as high as 78.2% as well as the negligible hysteresis. The champion PSC made with DBP gives a PCE of 21.49%, significantly increased compared to 19.68% from the reference cell without the modification. Moreover, DBP also serves as a water-resistant protection for improved moisture stability. The PCE of the DBP-treated cells without encapsulation remains more than 84% of its initial efficiency, which is significantly higher than that of the reference PSCs (65%) after 20 days of storage under an air environment with 50–65% humidity. This study provides an effective interface modification material to address notorious stability problems in Spiro-OMeTAD-based PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12544?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12544</a>.SEM images of the perovskite film treated by different concentrations of DBP; UV–vis spectra of the pristine and DBP-treated perovskite films; XRD patterns of the pristine and DBP-treated perovskite films; time-resolved PL spectra of different kinds of the perovskite films; and further information on device performance, J–V hysteresis, and stability (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12544/suppl_file/am0c12544_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Pyrophosphate interlayer improves performance of semi-transparent perovskite solar cells

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Balance the thickness, transparency and stability of semi-transparent perovskite solar cells by solvent engineering and using a bifunctional additive

Enhancing the Stability and Efficiency of Inverted Perovskite Solar Cells with a Mixed Ammonium Ligands Passivation Strategy

Interface Modification of a Perovskite/Hole Transport Layer with Tetraphenyldibenzoperiflanthene for Highly Efficient and Stable Solar Cells

Investigating the Balance between Power Conversion Efficiency and Average Visible Transmittance for Semitransparent Perovskite Solar Cells

Nonthermal laser ablation of high-efficiency semitransparent and aesthetic perovskite solar cells

Interface Modification Via a Hydrophobic Polymer Interlayer for Highly Efficient and Stable Carbon-Based Inorganic Perovskite Solar Cells

Ester‐Functionalized Polythiophene Interlayers for Enhanced Performance and Stability of Perovskite Solar Cells

Improving Efficiency and Stability of Perovskite Solar Cells Enabled by A Near-Infrared-Absorbing Moisture Barrier

Intermediate‐Adduct‐Assisted Growth of Stable CsPbI 2 Br Inorganic Perovskite Films for High‐Efficiency Semitransparent Solar Cells

In Situ Polymerization of Cross‐Linked Perovskite–Polymer Composites for Highly Stable and Efficient Perovskite Solar Cells

Semitransparent Perovskite Solar Cells with an Evaporated Ultra‐Thin Perovskite Absorber

Interlayer Modification Using Phenylethylamine Tetrafluoroborate for Highly Effective Perovskite Solar Cells

Efficient Semitransparent Solar Cells Enabled by Introducing N-Ethylbenzylamine Additives into Thin Layer of Halide Perovskites

Efficient and stable semitransparent perovskite photovoltaics via a Lewis base incorporation

Multimodal Approach towards Large Area Fully Semitransparent Perovskite Solar Module

Interface optimization and growth control for high efficiency wide bandgap perovskite solar cells

Efficient and stable perovskite solar cells fabrication in open air through adopting a dye interlayer

Printable High-Efficiency and Stable FAPbBr3 Perovskite Solar Cells for Multifunctional Building-Integrated Photovoltaics