Abstract:Perovskite solar cells (PSCs) have shown high optical absorption and consequently provide high conversion efficiency with stable performance. In our work, CH 3 NH 3 PbI 3 (MAPbI 3 ) as an absorber layer is analyzed for different crystalline structures. Cubic, tetragonal, and orthorhombic phases of perovskite material are investigated to check the impact of the crystalline structure on the solar cell performance. Both density of states and band structure are studied using Quantum-ESPRESSO package depending on density functional theory. Then, all relevant parameters were employed in SCAPS software and comprehensive study was done for examining the effect of the crystalline structure of perovskite layer on the solar cell performance. In-depth, analyses were conducted to evaluate key parameters, including open circuit voltage (V oc ), short circuit current (I sc ), fill factor (FF), and power conversion efficiency (PCE) considering the variations of perovskite layer thickness and bulk defect densities. The obtained results indicate that cells with cubic MAPbI 3 , which shows a notably higher bandgap of 1.7 eV and an enhanced optical absorption coefficient, especially in the higher wavelength range (around 10 5 cm −1 ), show better performance for almost all three scenarios. Cubic MAPbI 3 cells achieve relatively higher peak efficiency of 26% when the absorber layer thickness is almost 900 nm. The investigation into absorber bulk defect densities reveals the critical role of defect levels in PSC performance. Adjusting defect levels from 10 14 cm −3 to 10 18 cm −3 results in deteriorating trends in V oc , J sc , FF, and PCE. J sc remains stable until a defect level of 10 17 cm −3 , highlighting a threshold where defects begin to impact charge carrier generation and separation. Doping effect has been studied, PCE remains stable until a critical doping level of 10 16 cm −3 after which it drops significantly which indicates that doping is cautioned against due to its adverse effects on material and carrier transport. This finding holds significant promise for experimental solar cell fabrication, as it suggests that cubic MAPbI 3 's superior bandgap and enhanced optical absorption could lead to more efficient and robust photovoltaic devices in real-world applications.

Investigating the Balance between Power Conversion Efficiency and Average Visible Transmittance for Semitransparent Perovskite Solar Cells

Enhance and Balance AVT and PCE of the Semi-Transparent Perovskite Solar Cells for BIPV Via Grating-Based Photonic Crystals

Progress of Semitransparent Emerging Photovoltaics for Building Integrated Applications

Pivotal Routes for Maximizing Semitransparent Perovskite Solar Cell Performance: Photon Propagation Management and Carrier Kinetics Regulation

Combination of Highly Photovoltaic and Highly Transparent Materials Enables Record Performance Semitransparent Organic Solar Cells

Pyrophosphate interlayer improves performance of semi-transparent perovskite solar cells

2‐in‐1 Optimization for High Performance Semitransparent Perovskite Solar Cells

Multimodal Approach towards Large Area Fully Semitransparent Perovskite Solar Module

Intermediate‐Adduct‐Assisted Growth of Stable CsPbI 2 Br Inorganic Perovskite Films for High‐Efficiency Semitransparent Solar Cells

Toward high-performance semitransparent perovskite solar cells: interfacial modification and charge extraction perspectives

Breaking 1.7 V Open Circuit Voltage in Large Area Transparent Perovskite Solar Cells Using Interfaces Passivation

Semitransparent Perovskite Solar Cells for Building Integration and Tandem Photovoltaics: Design Strategies and Challenges

Comprehensive performance analysis of perovskite solar cells based on different crystalline structures of MAPbI3

Semitransparent Perovskite Solar Cells with an Evaporated Ultra‐Thin Perovskite Absorber

Nonthermal laser ablation of high-efficiency semitransparent and aesthetic perovskite solar cells

Innovative designs for semitransparent carbon-based perovskite solar cells for building-integrated applications

Ultrathin transparent indium tin oxide-based electrodes for enhanced performance of perovskite solar cells

Efficient Semitransparent Solar Cells Enabled by Introducing N-Ethylbenzylamine Additives into Thin Layer of Halide Perovskites

Semitransparent Perovskite Solar Cells for Photovoltaic Application

Printable High-Efficiency and Stable FAPbBr3 Perovskite Solar Cells for Multifunctional Building-Integrated Photovoltaics