Abstract:While the power conversion efficiency (PCE) of single-junction perovskite solar cells (PSCs) has increased to over 26%, there are some challenges to achieving flexible large-area PSCs with good long-term stability for practical applications. In this work, we demonstrate a self-assembled gradient Ti3C2Tx MXene incorporated PEDOT:PSS HTL for promoting flexible large-area PSCs by establishing half-caramelization-based glucose-induced MXene redistribution. Through this process, the Ti3C2Tx MXene nanosheets are spontaneously dispersed and redistributed at the top region of HTL to form the unique gradient distribution structure composed of MXene:Glucose:PEDOT:PSS (MG-PEDOT). Our results show that the MG-PEDOT HTL not only offers favorable energy level alignment and efficient charge extraction, but also improves the film quality of the perovskite layer featuring enlarged grain size, lower trap density, and longer carrier lifetime. Consequently, the power conversion efficiency (PCE) of the flexible device based on MG-PEDOT HTL is increased by 36% compared to that of pristine PEDOT:PSS HTL. Meanwhile, the flexible perovskite solar minimodule (15 cm2 area) using MG-PEDOT HTL achieves a PCE of 17.06%. The encapsulated modules show remarkable long-term storage stability at 85degC in ambient air (~90% efficiency retention after 1200 hours) and enhanced operational lifetime (~90% efficiency retention after 200 hours) [1]. With the adoption of the flexible transparent electrodes [2-5] and the introduction of a new modification on the perovskite active layer, the power-per-weight of our flexible PSCs reaches about 8 W/g while the power-per-weight of PEN/ITO-based control about 1-1.5 W/g. The work contributes to the development of flexible PSCs for practical applications. [1] R. Zhang, W.C.H. Choy*, et al, Adv. Funct. Mater., 33, 2210063, 2023. [2] J. Kim, W.C.H. Choy*, et al, Adv. Energy Mater., 10, 1903919, 2020. [3] X. He, W. C. H. Choy*, et al, Adv. Funct. Mater, 2010764, 2021. [4] J. Zheng, W.C.H. Choy*, et al, Energy & Environ. Sci., 16, 3770 2023. [5] J.J. Kim, W.C.H. Choy*, et al, Nature Comm. DOI:10.1038/s41467-024-46243-6.

Surface Plasmon‐Assisted Transparent Conductive Electrode for Flexible Perovskite Solar Cells

A Mechanically Robust Conducting Polymer Network Electrode for Efficient Flexible Perovskite Solar Cells

Semitransparent and Flexible Perovskite Solar Cell with High Visible Transmittance Based on Ultrathin Metallic Electrodes

High‐Performance Flexible Perovskite Solar Cells Enabled by Low‐Temperature ALD‐Assisted Surface Passivation

High‐Performance Flexible Perovskite Solar Cells via Precise Control of Electron Transport Layer

Flexible and efficient ITO-free semitransparent perovskite solar cells

Efficient Flexible Perovskite Solar Cells Using Low-Cost Cu Top and Bottom Electrodes.

High-Quality PEI/Ag/PEI-Zn Semitransparent Electrode for Efficient ITO-Free Flexible Organic Solar Cells and Perovskite Solar Cells

Fabrication Toward Flexible Perovskite Solar Cells under Open Air Via Enhanced Intermolecular Chelation

Multi-functional Transparent Electrode for Reliable Flexible Perovskite Solar Cells

Transparent Conductive Oxide-Free Perovskite Solar Cells with PEDOT:PSS As Transparent Electrode

Solution-Processed Polymeric Thin Film As the Transparent Electrode for Flexible Perovskite Solar Cells.

Embedded Nickel‐Mesh Transparent Electrodes for Highly Efficient and Mechanically Stable Flexible Perovskite Photovoltaics: Toward a Portable Mobile Energy Source

Highly Flexible Organo-Metal Halide Perovskite Solar Cells Based on Silver Nanowire-Polymer Hybrid Electrodes

(Invited) Advanced Electrodes and Carrier Transport Layers for Flexible/ Foldable Photovoltaic Devices and Modules

Scalable, Efficient and Flexible Perovskite Solar Cells with Carbon Film Based Electrode

All‐Carbon‐Electrode‐Based Endurable Flexible Perovskite Solar Cells

Recent Progress of Electrode Materials for Flexible Perovskite Solar Cells

Flexible Perovskite Solar Cells Via Surface-Confined Silver Nanoparticles On Transparent Polyimide Substrates

Enhanced Performance and Flexibility of Perovskite Solar Cells Based on Microstructured Multilayer Transparent Electrodes

Fapbi(3) Flexible Solar Cells With A Record Efficiency Of 19.38% Fabricated In Air Via Ligand And Additive Synergetic Process