Abstract:Ideal cavities face a high risk of erosion in relation to pneumatic conveying. To reduce erosion, we introduce a height difference in the cavity, with the leading wall higher than the aft wall. To improve the cavity structure, the URANS (SST)-DPM method is adopted to study the effect of height difference h on gas flow, particle distribution, and particle erosion of a horizontal ideal cavity. The simulation procedure is validated by comparing the computational fluid dynamics results with experimental results. The results of the gas flow modeling show that the shear layer impinges on the aft wall when h is relatively small, and re-attaches on the downstream bottom wall as h increases. The re-attachment length is initially identical to the cavity width, then increases uniformly with h. Results of the particle distribution simulations indicate that for a Stokes number (St) of 0.12, the particles are evenly distributed in the cavity, and the distribution is independent of h; for St=1.2, dominated by the centrifugal force, the particles are mainly concentrated along the periphery of the main vortex when h is small. Owing to the variation of the main vortex, as h increases, more particles will fall down into the main vortex. For St=9.1, where gravity is dominant, the particles collide on the aft wall and rebound into the cavity through the main vortex when h is small. Otherwise, particles will move forward and only a few particles appear in the cavity. We explored the erosion distribution on the downstream bottom walls and extracted and analyzed the initial erosion positions. We also investigate the erosion on the aft walls, and the results indicate that lowering the aft wall even slightly will significantly reduce erosion.

Numerical prediction of erosion due to a cavitating jet

Numerical assessment of cavitation-induced erosion using a multi-scale Euler–Lagrange method

Numerical Simulation of the Micro-Jet Velocity and Cavitation-Erosion on an Axisymmetric Nozzle

Numerical Prediction of Cavitation Erosion on a Francis Turbine Runner

Large eddy simulations of cavitating flow in a step nozzle with injection into gas

Numerical Prediction of Cavitation Erosion Risk Based on a New Erosion Indicator

Numerical Study of Solid Particle Erosion in a Cavity with Different Wall Heights

Numerical Prediction of Solid Particle Erosion in Jet Pumps Based on a Calibrated Model

Numerical prediction of impact force in cavitating flows

Numerical Simulation of the Cavitation Micro–jet Velocity and Erosion on a Plane–convex Hydrofoil with Semicylindrical Obstacle

Numerical Simulation of Cavitation Erosion on A Naca0015 Hydrofoil Based on Bubble Collapse Strength

Investigation of condensation shocks and re-entrant jet dynamics in a cavitating nozzle flow by Large-Eddy Simulation

Numerical prediction of cavitation nuisance on hydrofoils: Combined analysis of cavity dynamics and the aggressiveness of collapsing cavitating structures

Numerical Simulation of Cavitation-Erosion on a Plane-Convex Hydrofoil Using a Homogeneous Mixture Assumption

Evaluation of Cavitation Erosion Intensity in a Microscale Nozzle Using Eulerian–Lagrangian Bubble Dynamic Simulation

Exploration of cavitation-induced erosion metrics in throttle flow simulations

Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction

Predicting Erosion in a Non-Newtonian Shear-Thinning Jet Flow with Validated CFD Models from PIV and PTV Measurements

Numerical Simulation of Micro Bubble Collapse Near Solid Wall in Fluent Environment

Numerical Simulation of Cavitation Flow Characteristic on Pelton Turbine Bucket Surface

Numerical Study of the Shock Wave and Pressure Induced by Single Bubble Collapse Near Planar Solid Wall