Abstract:Although there have been extensive investigations characterizing cavitation phenomenon in fuel injectors, much is still unknown about the mechanisms driving cavitation-induced erosion, and how these complicated physics should be represented in a model. In lieu of computationally expensive fluid-structure interaction modeling, the Eulerian mixture modeling approach has been accepted as an efficient means of capturing cavitation phenomena. However, there remains a need to link the erosive potential of cloud collapse events with the subsequent material deformation and damage of neighboring surfaces. Even though several cavitation erosion indices have been proposed in the literature, no single metric has been identified as universally applicable across all injector-relevant conditions. The objective of this work is to identify parameters that characterize the erosive potential of cavitation cloud collapse mechanisms that are likely to occur within injector orifices. While a commonly employed cavitation erosion metric, namely the maximum local pressure, was found to provide indications of potential sites for pitting and material rupture from single impact events, no additional information could be determined regarding the material erosion process. To improve representation of the incubation period within the cavitation erosion process, a new metric was derived based on cumulative energy absorbed by the solid material from repeated hydrodynamic impacts. Through evaluation of predicted cavitation cloud collapse events in a channel geometry against available experimental data, the stored energy metric yielded insight into the erosive potential of recorded impact events. The stored energy metric provided a means to accurately predict the influence of flow conditions on the incubation period before material erosion. ...

Numerical Prediction of Cavitation Erosion Risk Based on a New Erosion Indicator

Numerical prediction of vibration-induced cavitation erosion in high-speed gears using erosion risk indicators

An Improved Eulerian-Lagrangian Method Combined with Ductile Material Model for Cavitation Erosion Assessment

Numerical Prediction of Cavitation Erosion on a Francis Turbine Runner

Numerical Prediction of Performance Drop Due to Cavitation in a Centrifugal Pump

Assessment of cavitation erosion risk indicated by pressure impact exceeding material strength threshold

Numerical prediction of erosion due to a cavitating jet

Numerical Prediction of Solid Particle Erosion in Jet Pumps Based on a Calibrated Model

Impact of re-entrant jet and shedding cloud cavity on the distribution of cavitation erosion

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

Evaluation of a new cavitation erosion metric based on fluid-solid energy transfer in channel flow simulations

Numerical prediction of cavitation nuisance on hydrofoils: Combined analysis of cavity dynamics and the aggressiveness of collapsing cavitating structures

Sediment-wear morphology prediction method of hydraulic machine based on differential-quadrature method

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

Numerical simulation of sand erosion in Venturi tube under different flow characteristics and sand content

Numerical Investigation of the Erosion Behavior in Blades of Tidal Current Turbine

Numerical Investigation on the Hydrodynamic Performance with Special Emphasis on the Cavitation Intensity Detection in a Venturi Cavitator

Numerical Prediction of Erosion in Elbow Based on Cfd-Dem Simulation

Numerical assessment of cavitation-induced erosion using a multi-scale Euler–Lagrange method

Predicting Erosion in a Non-Newtonian Shear-Thinning Jet Flow with Validated CFD Models from PIV and PTV Measurements

Numerical Simulation of Cavitation Erosion on A Naca0015 Hydrofoil Based on Bubble Collapse Strength