Abstract:The physical mechanism of flow unsteadiness is one of the key problems in cavitating flow. Significant efforts have been exerted to explain the cavitation-vortex interaction mechanism. As well, the process of kinetic energy transport during the evolution of unsteady cavitating flow must be elucidated. In this work, 2D calculations of cavitating flow around a NACA66 hydrofoil were performed based on the open source software OpenFOAM. The modified shear stress transport k-ω turbulence model, which considers curvature and turbulent eddy viscosity corrections, was employed to close the governing equations. The Schnerr-Sauer cavitation model was adopted to capture the cavitation phase change process. Numerical results showed reasonable consistency with the results of the experiments conducted by Leroux et al. (2004). The results showed that cavitation promotes turbulence intensity and flow unsteadiness around the hydrofoil. During the attached sheet cavity growth stage, high-value regions of turbulent kinetic energy are located substantially at the interface of the cavity, particularly at the rear portion of the cavity region. During the cloud cavity shed-off stage, the cavity begins to break off and the maximum value of turbulent kinetic energy is observed inside the shed cavity. Finally, the influence of cavitation on the turbulence intensity is illustrated using the turbulent kinetic energy transport equation, which shows that the pressure diffusion and turbulent transport terms dominate as cavitation occurs. In addition, cavitation promotes turbulence production and increases dissipation with fluid viscosity and flow unsteadiness. The viscous transport term only acts in the cavitation shedding stage under large-scale vortex shedding. Overall, these findings are of considerable interest in engineering applications.

A Pressure-Based Algorithm for Cavitating Flow Computations

Numerical Simulation of Cavitation Flow under High Pressure and Temperature

Numerical Simulation Of Unsteady Flow Characteristics For Cavitation Around A 3-D Hydrofoil

Numerical analysis of cavitating flow around a hemisphere-cylinder body

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

A new cavitation model based on evaporation and condensation theory

Numerical prediction of impact force in cavitating flows

Analysis of Ventilated Cavitation Around A Cylinder Vehicle with Nature Cavitation Using A New Simulation Method

Numerical Simulation of Cavitation Characteristic Around Hydrofoil NACA0015

Calculation of Cavitation Evolution and Associated Turbulent Kinetic Energy Transport Around a NACA66 Hydrofoil

Analysis of Two-Phase Cavitating Flow with Two-Fluid Model Using Integrated Boltzmann Equations

Cavitation Simulation with Consideration of the Viscous Effect at Large Liquid Temperature Variation

Numerical Simulation of Cavitation-Erosion on a Plane-Convex Hydrofoil Using a Homogeneous Mixture Assumption

Data-driven turbulence model for unsteady cavitating flow

Application of Preconditioning Method to Gas-Liquid Two-Phase Flow Computations

Numerical Simulation of Cavitation for 3-D ALE15 Hydrofoil

NUMERICAL MODELING OF UNSTEADY VISCOUS CAVITATION FLOWS

Modeling liquid hydrogen cavitating flow with the full cavitation model

Cavitating Flow Analysis and Design Optimization for a Waterjet Mixed Flow Pump

Calculation and verification of dynamical cavitation model for quasi-steady cavitating flow

Prediction Method of Cavitation Jet Wave Attenuation Based on Five-Equation Two-Fluid Model