Abstract:The optimal silicon electrode that should have a practical capacity of roughly 1200 mAh/g for a balanced lithium-ion cell is a dream and thus a challenge. Pulverization of silicon particles and loss of electrical contact have been identified as the main causes for the performance deterioration. Binder formulations, cut-off window for the cycling, and electrolyte composition with different additives are some routes to take to improve the long-term cycling stability of the electrode. In this presentation, we will especially focus on characterization of the SEI and the buried interface below the SEI which can give us new light on how to improve the use of silicon 1,2,3,4 We will discuss how different lithium salts can give very different SEI compositions and buried interfaces. We will also show how some of the salts will give SEIs that are porous and other that lead to a continuous growing SEI as a function of cycling. The role of state of charge on the growth of SEI will be discussed. The lessons we have learnt about the SEI on silicon will be dwelt upon by giving examples on strategies to improve cycling stability. We will show how a 3D hierarchical arrangement of spatially confined Si nanocrystals, within several different physical insulting capsules, can be one way of improving the performance. Firstly, an elastic, highly oriented graphene monolith (GF) has been engineered to fully encapsulate Si nanoparticles, serving as a robust framework with accessible thoroughfares for electrolyte percolation. The framework is also acting as an electrolyte blocking layer to restrain Si from direct exposure to electrolyte without sacrificing the highly efficient electron/Li ion transport channels. The Si nanoparticles are arranged in pillars within the hierarchical structure. This seems to be to prevent the graphene sheets from re-stacking. Secondly, a TiOxFy layer was grown on the silicon surface to support in-situ etching of the native oxide layer into a hollow interior. When evaluated as binder-free anodes, both types of electrodes exhibit cycle life for more than 1000 cycles with average coulombic efficiencies higher than 99.5%. Operando XRD and synchrotron-based XPS confirmed the formation of the most volume expanded lithiated phase Li15Si4, suggesting the effective buffering of the volume variation upon cycling. Furthermore, we have also developed a GF/Si free-standing film through re-adjusting the pore size in GF/Si monolith. Thanks to high electrical conductivity, the elasticity and structural integrity of GF monoliths, the as-developed GF/Si free-standing film showcases the potential use in the flexible electronic devices. The engineering of interfaces in relation to optimizing electrolyte composition are important strategies for the future of stable LIBs. References 1 B. Philippe, R. Dedryvère, J. Allouche, F. Lindgren, M. Gorgoi, H. Rensmo, D. Gonbeau, and K. Edström, Nanosilicon Electrdoes for Lithium-Ion Batteries: Interfacial Mechaisms Studied by Hard and Soft X-ray Photoelectron Spectroscopy. Chem. Mater., 24, 1107-1115 (2012). 2 B. Philippe, . R. Dedryvère, M. Gorgoi, H. Rensmo, D. Gonbeau, and K. Edström, Improved Performances of Nanosilicon Electrodes Using the Salt LiFSI: A Photoelectron Spectroscopy Study. JACS 135, 9829-9842 (2013). 3C. Xu, F. Lindgren, B. Philippe, M. Gorgoi, F. Björefors, K. Edström, and T. Gustafsson, Improved Performance of the Silicon Anode for Li-Ion Batteries: Understanding the Surface Modification Mechanism of Fluoroethylene Carbonate as an Effective Electrolyte Additive Chem. Mater. 27, 2591-2599 (2015). 4F. Lindgren, C. Xu, J. Maibach, A.M. Andersson, M. Marcinek, L. Niedzicki, T. Gustafsson, F. Bjoreförs, and K. Edström, A hard X-ray photoelectron spectroscopy study on the solid electrolyte interphase of a lithium 4,5-dicyano-2-(trifluoromethyl)imidazolide based electrolyte for Si-electrodes, J. Power Sources, 301, 105-112 (2016). Acknowledgments We acknowledge HZB for the allocation of synchrotron radiation beamtime. The research leading to these results has received funding from the European Community's Seventh Framework Program (FP7/2007-2013) under grant agreement n.°312284. The authors are also grateful to StandUp for Energy and the Swedish Research Council (contract 2012-4681) for financial support.

Probing Surface Dynamics of SiO x Thin-Film Electrodes during Cycling through X-Ray Photoemission Spectroscopy and Operando X-Ray Reflectivity

Probing Surface Dynamics of SiOx Thin-Film Electrodes during Cycling through X-Ray Photoemission Spectroscopy and Operando X-Ray Reflectivity

In Situ Atomic-Scale Imaging of Electrochemical Lithiation in Silicon.

Lithiation of SiO2 in Li-ion Batteries: in Situ Transmission Electron Microscopy Experiments and Theoretical Studies.

Operando XPS: A Novel Approach for Probing the Lithium/Electrolyte Interphase Dynamic Evolution

Operando Ambient Pressure X Ray Photoelectron Spectroscopy for Li-Ion Battery Electrode/Electrolyte Interface Probing

Operando X-ray Absorption Spectroscopy Reveals Solid Electrolyte Interphase Formation on Silicon Anodes for Li-ion Batteries

Adapting Simultaneous in Operando Electrochemical Quartz Crystal Microbalance (EQCM) and Electrochemical Impedance Spectroscopy (EIS) to Studies of SEI Layer Formation on Amorphous Silicon Anodes

Operando Hard X-Ray Photoelectron Spectroscopy for Observing Interfacial Electrochemical Reactions in All-Solid-State Batteries

Investigation on Si Anode Materials for Lithium-Ion Batteries Using X-ray Absorption Spectroscopy

Shedding X-ray Light on the Interfacial Electrochemistry of Silicon Anodes for Li-Ion Batteries.

Adapting Simultaneous in Operando Electrochemical Quartz Crystal Microbalance and Electrochemical Impedance Spectroscopy to Studies of Solid Electrolyte Interface Layer Formation on Amorphous Silicon Anodes

Link between anisotropic electrochemistry and surface transformations at single‐crystal silicon electrodes: Implications for lithium‐ion batteries

Monitoring the Behavior of Na Ions and Solid Electrolyte Interphase Formation at an Aluminum/Ionic Liquid Electrode/Electrolyte Interface via Operando Electrochemical X-ray Photoelectron Spectroscopy

Surficial Structure Regulation of SiOx Material by High-Energy Ball Milling and Wet-Alkali Chemical Reaction for Lithium-Ion Batteries

Silicon and Its Challenging Interfaces

Probing lithium mobility at a solid electrolyte surface

Investigation of the Cathode–Catalyst–Electrolyte Interface in Aprotic Li–O2 Batteries

Lithium electrochemistry of SiO2 thin film electrode for lithium-ion batteries

Post Mortem and Operando XPEEM: a Surface-Sensitive Tool for Studying Single Particles in Li-Ion Battery Composite Electrodes

Atomic Insight into the Lithium Storage and Diffusion Mechanism of SiO2/Al2O3 Electrodes of Lithium Ion Batteries: ReaxFF Reactive Force Field Modeling