Abstract:A mild re‐lithiation method is proposed for the direct regeneration of the degraded cathode, guided by the principle of potential regulation in the alkaline. The implementation of moderate regeneration conditions ensures enhanced security and profitability compared to the conventional leaching method, thus presenting a favorable potential for practical application and sustainable development of spent LIBs. The rapid proliferation of power sources equipped with lithium‐ion batteries poses significant challenges in terms of post‐scrap recycling and environmental impacts, necessitating urgent attention to the development of sustainable solutions. The cathode direct regeneration technologies present an optimal solution for the disposal of degraded cathodes, aiming to non‐destructively re‐lithiate and straightforwardly reuse degraded cathode materials with reasonable profits and excellent efficiency. Herein, a potential‐regulated strategy is proposed for the direct recycling of degraded LiFePO4 cathodes, utilizing low‐cost Na2SO3 as a reductant with lower redox potential in the alkaline systems. The aqueous re‐lithiation approach, as a viable alternative, not only enables the re‐lithiation of degraded cathode while ignoring variation in Li loss among different feedstocks but also utilizes the rapid sintering process to restore the cathode microstructure with desirable stoichiometry and crystallinity. The regenerated LiFePO4 exhibits enhanced electrochemical performance with a capacity of 144 mA h g−1 at 1 C and a high retention of 98% after 500 cycles at 5 C. Furthermore, this present work offers considerable prospects for the industrial implementation of directly recycled materials from lithium‐ion batteries, resulting in improved economic benefits compared to conventional leaching methods.

Direct regeneration of spent LiFePO4 cathode materials with pre-oxidation and V-doping

High performance of regenerated LiFePO4 from spent cathodes via an in situ coating and heteroatom-doping strategy using amino acids

Direct Regeneration of High-Value LiFePO 4 Cathode Materials with Nitrogen Doped Carbon Coating

Direct regeneration of fluorine-doped carbon-coated LiFePO4 cathode material from spent lithium-ion battery

Long‐Life Regenerated LiFePO4 from Spent Cathode by Elevating the d‐Band Center of Fe

Direct regeneration of waste LiFePO4 cathode materials with a solid-phase method promoted by activated CNTs

Closed-loop regeneration of LiFePO4 from spent lithium-ion batteries: A “feed three birds with one scone” strategy toward advanced cathode materials

Direct regeneration of LiFePO4 cathode by inherent impurities in spent lithium-ion batteries

Direct regeneration of spent cathode materials by redox system

Sustainable and facile synthesis of high-performance nitrogen-doped carbon/graphene@LiFePO4 cathode materials from spent LiFePO4

Direct regeneration of spent LiFePO4 cathode materials assisted with a bifunctional organic lithium salt

Regenerated LiFePO4/C for scrapped lithium iron phosphate powder batteries by pre-oxidation and reduction method

Direct Regeneration of Degraded LiFePO4 Cathode via Reductive Solution Relithiation Regeneration Process

Revealing Lithium Configuration in Aged Layered Oxides for Effective Regeneration

Potential‐Regulated Design for Direct Recycling of Degraded LiFePO4 Cathode

Toward High Voltage Performance of LiCoO 2 Cathode Materials Directly Regenerated with a Bulk and Surface Synergistic Approach from Spent Lithium-Ion Batteries

High Electrochemical Performance Recycling Spent LiFePO 4 Materials through the Preoxidation Regeneration Strategy

Direct regeneration of spent LiFePO 4 materials via a green and economical one-step hydrothermal process

Room-temperature Direct Regeneration of Spent LiFePO4 Cathode Using the External Short Circuit Strategy

Environmental-friendly low-cost direct regeneration of cathode material from spent LiFePO 4

Selective recovery of Li and FePO4 from spent LiFePO4 cathode scraps by organic acids and the properties of the regenerated LiFePO4