Abstract:A huge number of spent lithium-ion batteries (LIBs) have caused serious problems such as resource waste and environmental pollution. Lithium iron phosphate (LFP) is one of the major cathode materials in the spent LIBs. It is urgently needed to develop a safe, environmentally friendly, and cost competitive approach to regenerate the LFP cathode collected from the spent LIBs. The nitrate molten salt process has been utilized to regenerate layered cathode materials, which are nevertheless non-compatible with the LFP regeneration process. The LFP crystal lattice will be destroyed during the molten salt process by the oxidative environment, where Fe(II) is oxidized to Fe(III). A new approach is proposed in this work to tackle this issue, where a low-temperature molten salt process is coupled with a reductive environment to suppress oxidation of Fe(II). In detail, lithium nitrate is used as a molten salt medium and lithium source simultaneously. Sucrose is used as a carbon source to provide a reductive environment. Through a short molten-salt relithiation step at 300 °C and further annealing process at 650 °C, LFP particles with a lithium-deficient and damaged structure can be successfully recovered. The rapid lithium replenishment process exposes more (101) crystal planes facilitating lithium-ion transportation. As a result, the regenerated LFP delivers a specific capacity of 145 mAh g–1 at 0.5C, which is more than a 13% increase relative to the spent LFP and has a better rate performance than pristine LFP at 5C. In addition, we also point out that the LFP is converted to Li3PO4 with the increase in lithium source and the extension of treatment time. This work provides a new promising way to regenerate spent LFP cathodes.This article has not yet been cited by other publications.

Direct regeneration of spent LiFePO4 cathode materials assisted with a bifunctional organic lithium salt

Direct regeneration of LiFePO4 cathode by inherent impurities in spent lithium-ion batteries

Direct regeneration of degraded lithium-ion battery cathodes with a multifunctional organic lithium salt

Simultaneous anodic de-lithiation/cathodic lithium-embedded regeneration method for recycling of spent LiFePO 4 battery

Direct regeneration of fluorine-doped carbon-coated LiFePO4 cathode material from spent lithium-ion battery

High performance of regenerated LiFePO4 from spent cathodes via an in situ coating and heteroatom-doping strategy using amino acids

Direct regeneration of spent LiFePO 4 materials via a green and economical one-step hydrothermal process

Direct Regeneration of Degraded LiFePO4 Cathode via Reductive Solution Relithiation Regeneration Process

Direct Regeneration of Spent Lithium Iron Phosphate via a Low-Temperature Molten Salt Process Coupled with a Reductive Environment

Room-temperature Direct Regeneration of Spent LiFePO4 Cathode Using the External Short Circuit Strategy

Long‐Life Regenerated LiFePO4 from Spent Cathode by Elevating the d‐Band Center of Fe

Direct regeneration of waste LiFePO4 cathode materials with a solid-phase method promoted by activated CNTs

A Room‐Temperature Lithium‐Restocking Strategy for the Direct Reuse of Degraded LiFePO4 Electrodes

A Multifunctional Amino Acid Enables Direct Recycling of Spent LiFePO4 Cathode Material

Environmental-friendly low-cost direct regeneration of cathode material from spent LiFePO 4

Interfacial Metal-Solvent Chelation for Direct Regeneration of LiFePO4 Cathode Black Mass.

Closed-loop regeneration of LiFePO4 from spent lithium-ion batteries: A “feed three birds with one scone” strategy toward advanced cathode materials

Direct and rapid regeneration of spent LiFePO 4 cathodes via a high-temperature shock strategy

Solvothermal Strategy for Direct Regeneration of High-Performance Cathode Materials from Spent Lithium-Ion Battery

Multiscale Observations on Mechanisms for Direct Regeneration of Degraded NCM Cathode Materials

Direct regeneration of spent LiFePO4 cathode materials with pre-oxidation and V-doping