Abstract:Heat treatment is the most common method to relieve residual stress and to adjust tensile properties in additively manufactured material. However, the well-known strengthening factors (e.g., dislocation density, cellular sub- structure, low angle grain boundaries, nano-oxide particle) in selective laser melted 316 L (SLM 316 L) are strongly influenced by heat-treatment temperature. In this work, horizontal and vertical oriented SLM 316 L specimens are heat treated from 550 degrees C to 1150 degrees C, followed by tensile tests and microstructural characteriza- tion. With increasing temperature, strength (e.g., yield strength, ultimate tensile strength) is found to decrease and elongation is found to increase. The heat treatments of 550 degrees C, 650 degrees C and 750 degrees C lead to coarsening of cellular sub-structure. Furthermore, the cellular sub-structure and melt boundaries annihilate at 950 degrees C. When the temperature reaches 1150 degrees C, SLM 316 L has finished recrystallization with volume fraction of nano-oxide particles increasing greatly. Based on microstructural characterization, the proposed relationship, considering strengthening mechanisms of cellular sub-structure, nano-oxide particle and grain boundaries, give satisfactory accuracy to predict yield strength for horizontal orientation. The yield strength for vertical orientation can also be predicted by this relationship when modified by consideration of anisotropy of columnar grains and lack-of- fusion defects. The anisotropy and lack-of-fusion lead to 5.4% reduction in yield strength for the vertical orientation. This work establishes quantitative relationships for heat treatment-microstructure-property, in which the anisotropy of tensile properties is considered.

Simultaneous enhancements of strength and ductility of a selective laser melted H13 steel through inoculation treatment

Microstructures and Mechanical Properties of H13 Tool Steel Fabricated by Selective Laser Melting

High-speed manufacturing-driven strength-ductility improvement of H13 tool steel fabricated by selective laser melting

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Ultrastrong and Ductile Additively-Manufactured Medium-Carbon Steel Via Modulating Austenite Stability

Selective laser melting of H13: microstructure and residual stress

Effect of Heat Treatment on Microstructural Evolution, Mechanical Properties and Tribological Properties of H13 Steel Prepared Using Selective Laser Melting

Selective laser melting processing of heterostructured Ti6Al4V/FeCoNiCrMo alloy with superior strength and ductility

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Rationalization of brittleness and anisotropic mechanical properties of H13 steel fabricated by selective laser melting

Simultaneous strength and ductility enhancements of high thermal conductive Ag7.5Cu alloy by selective laser melting

In-situ generation of high-strength AISI 1045 steel with SiO 2 nano-precipitation by selective laser melting (SLM)

A short review on selective laser melting of H13 steel

Achieving Unexpected Strength and Ductility Synergies in Heterogeneous Metastable Lamellar Steels

Tailoring Heterogeneous Microstructure in a High-Strength Low-Alloy Steel for Enhanced Strength-Toughness Balance

Assessment of Mechanical Behavior in H13 Tool Steel Synthesized through Electron Beam Melting and Selective Laser Melting Techniques

Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting

Role and mechanism of innovative addition process of trace nano-TiC p in microstructure manipulation and significant mechanical properties enhancement of H13 steels

Achieving Excellent Strength and Ductility of 24crnimoy Alloy Steel Fabricated by High Power Selective Laser Melting Technology

Microstructure evolution and mechanical properties of H13 steel produced by Selective Electron Beam Melting

Enhanced strength–ductility synergy and transformation-induced plasticity of the selective laser melting fabricated 304L stainless steel