Abstract:Distributed fibre optic sensors (DFOS) are popular for structural health monitoring applications in large engineering infrastructure because of their ability to provide spatial strain measurements continuously along their lengths. Curved paths, particularly semicircular paths, are quite common for optical fibre placement in large structures in addition to straight paths. Optical fibre sensors embedded in a curved path configuration typically measure a component of strain, which often cannot be validated using traditional approaches. Thus, for most applications, strain measured along curved paths is ignored as there is no proper validation tool to ensure the accuracy of the measured strains. To overcome this, an analytical strain transformation equation has been developed and is presented here. This equation transforms the horizontal and vertical strain components obtained along a curved semicircular path into a strain component, which acts tangentially as it travels along the curved fibre path. This approach is validated numerically and experimentally for a DFOS installed on a steel specimen with straight and curved paths. Under tensile and flexural loading scenarios, the horizontal and vertical strain components were obtained numerically using finite element analysis and experimentally using strain rosettes and then, substituted into the proposed strain transformation equation for deriving the transformed strain values. Subsequently, the derived strain values obtained from the proposed transformation equation were validated by comparing them with the experimentally measured DFOS strains in the curved region. Additionally, this study has also shown that a localised damage to the DFOS coating will not impact the functionality of the sensor at the remaining locations along its length. In summary, this paper presents a valid strain transformation equation, which can be used for transforming the numerical simulation results into the DFOS measurements along a semicircular path. This would allow for a larger scope of spatial strains measurements, which would otherwise be ignored in practice.

Strain transfer effect on measurements with distributed fiber optic sensors

Strain Transfer Mechanism in Surface-Bonded Distributed Fiber Optic Sensors under Different Strain Fields

Theoretical and Experimental Analyses on Strain Transferring of Distributed Optical Fiber Sensor

Strain transfer mechanism in surface-bonded distributed fiber-optic sensors subjected to linear strain gradients: Theoretical modeling and experimental validation

Study on Strain Transfer Characteristics of Distributed Optical Fiber Sensor under Complex Deformation Condition

Study of Large Strain OFDR Sensor Based on Inclined Transfer Structure

Non-peer reviewed preprint submitted to EarthArXiv

Strain Transfer Mechanisms and Mechanical Properties of Optical Fiber Cables

Improving the durability of the optical fiber sensor based on strain transfer analysis

Strain Transfer Relationship Between Optical Fiber Sensor and Structure Matrix

Advanced Fiber Optic Sensing for Cryogenic Simultaneous Temperature and Strain Measurement

Role of the interface between distributed fibre optic strain sensor and soil in ground deformation measurement

Simultaneous Measurement of Strain and Temperature Using A Hybrid Local and Distributed Optical Fiber Sensing System

Comparison of DOFS Attachment Methods for Time-Dependent Strain Sensing

Characterizing the strain transfer on the sensing cable-soil interface based on triaxial testing

Quantifying Progressive Failure of Micro-Anchored Fiber Optic Cable–Sand Interface via High-Resolution Distributed Strain Sensing

Distributed Fibre Optic Sensor-Based Continuous Strain Measurement along Semicircular Paths Using Strain Transformation Approach

EXPERIMENTAL STUDY ON STRAIN SENSING OPTICAL FIBER-SOIL INTERFACIAL PROPERTIES CONSIDERING INFLUENCE OF EMBEDMENT LENGTH

Experimental Research on Strain Transfer Behavior of Fiber-Optic Cable Embedded in Soil Using Distributed Strain Sensing

A Review of Recent Distributed Optical Fiber Sensors Applications for Civil Engineering Structural Health Monitoring

Experimental Study of Measuring Strain by Fiber-Optic Sensor Used in Civil Engineering Structures