Abstract:Distributed optical fiber sensing techniques have gradually played a prominent role in nondestructive structural health monitoring in the past decade due to their distinctive high durability, large data transmission bandwidth and inherent immunity to electric or electromagnetic interference. Brillouin opticaltime domain reflectometry called BOTDR, as a newly developed distributed optical fiber sensing technique, is capable of measuring the strain rising along whole sensing optical fiber. However, its measuring linearity, the precision and the applicability are uncertain yet for different types of sensing optical fibers; thus the calibration must be carried out before used. Using a calibration system for distributed optical fiber strain sensors, designed and made by authors, this paper investigated the linearity, the precision and the applicability of the nylon-jacketed optical fibers, whose strain was measured by BOTDR and strain gauges. The sensing optical fibers together with some strain gauges were all stuck to the surface of a steel cantilever with uniform strength, and then the cantilever was loaded step by step. Also, the theoretical calculation was carried out for reference. The measuring results of the sensing fibers showed a good linearity, and the correlation coefficients of it, based on the references values from strain gauges and theoretical calculation, were both more than 0.99. The relative errors attributed to both reference values can meet the needs of engineering application. And finally the conclusion can be made that the nylon jacketed optical fiber sensors have enough measure linearity, precision and applicability for practical use, also this calibration method provides an efficient way to further case study.

Theoretical and Experimental Analyses on Strain Transferring of Distributed Optical Fiber Sensor

Theoretical and experimental study on strain transfer of distributed optical fiber sensor *

Strain Transfer Theory of Industrialized Optical Fiber-Based Sensors in Civil Engineering: A Review on Measurement Accuracy, Design and Calibration

Study on Strain Transfer Characteristics of Distributed Optical Fiber Sensor under Complex Deformation Condition

Strain transfer effect on measurements with distributed fiber optic sensors

Strain Transfer Mechanism in Surface-Bonded Distributed Fiber Optic Sensors under Different Strain Fields

Theoretical analysis on the distributed-optic-fiber strain sensor based on the Brillouin scattering

Calibration test researches on distributed optical fiber strain sensors

Study of Large Strain OFDR Sensor Based on Inclined Transfer Structure

A New Optical Fiber Sensor with Improved Strain Sensitivity Based on Distributed Optical Fiber Sensing Technique

Simultaneous Measurement of Strain and Temperature Using A Hybrid Local and Distributed Optical Fiber Sensing System

Strain transfer mechanism in surface-bonded distributed fiber-optic sensors subjected to linear strain gradients: Theoretical modeling and experimental validation

Experimental Research on Monitoring Concrete Expansion and Cracking Induced by Corrosion based on Distributed Optical Fiber Sensor

Performances of Distributed Fiber Optic Strain Sensor with Thin-Walled Ring

Strain Transfer Relationship Between Optical Fiber Sensor and Structure Matrix

Improving the durability of the optical fiber sensor based on strain transfer analysis

Strain Transferring Analysis of Fiber Bragg Grating Sensors

Strain Transferring of Embedded Fiber Bragg Grating Sensors

Characterizing the strain transfer on the sensing cable-soil interface based on triaxial testing

The Experimental Study of Distributed Optical Fiber Sensor Based on Metal Banding

Experimental Analysis on Real-time Distributed Strain Measurement in Concrete