Quantifying Progressive Failure of Micro-Anchored Fiber Optic Cable–Sand Interface via High-Resolution Distributed Strain Sensing

Cheng-Cheng Zhang,Hong-Hu Zhu,Suping Liu,Bin Shi,Gang Cheng
DOI: https://doi.org/10.1139/cgj-2018-0651
IF: 3.6
2020-01-01
Canadian Geotechnical Journal
Abstract:Distributed fiber optic sensing (DFOS) is gaining increasing interest in geotechnical monitoring. By using soil-embedded fiber optic cables, strain profiles as well as deformation patterns of geotechnical infrastructures can be captured. Probing the fiber optic cable-soil interfacial behavior is vital to the advancement of DFOS-based geotechnical monitoring and our understanding of the soil-inclusion interaction mechanism. To this aim, laboratory pullout tests were performed to investigate the progressive failure of the interface between micro-anchored cables and the surrounding sand. High-resolution strain profiles recorded using Brillouin optical time-domain analysis (BOTDA) not only elucidated the influence of anchorage on strain measurements, but also allowed the classical soil-inclusion interaction problem to be studied in detail. Interfacial shear stresses calculated from step-like strain profiles provided clear evidence of the contribution of each micro-anchor to the pullout resistance. The cable-soil contact is a combination of overall bonding and point fixation depending on the level of mobilized interfacial shear stress, and therefore the validity of measured strains is correlated to a three-stage process of interface failure. This study also shows that installing heat-shrink tubes on the fiber optic cable is a rapid, low-cost, effective approach to make an anchored DFOS system for deformation monitoring of earth structures.
What problem does this paper attempt to address?