Abstract:The paper details the optimization of efficiency parameters for a InGaN TQW laser diode using the particle swarm optimization algorithm through SILVACO software. By adjusting layer thickness based on output power, slope efficiency, and threshold current, significant enhancements were achieved. Three optimized laser diodes (LD1, LD2, LD3) were compared with a primary LD, revealing notable improvements in output power and overall performance. Analysis of carrier recombination rates in the active region highlighted increased stimulated recombination and decreased non-radiative recombination, particularly in the n-side well. The study also showed a more uniform radiative recombination in the quantum wells of the optimized LDs, especially in LD3. Investigation of electron and hole concentrations, current densities, and energy levels demonstrated higher electron and hole current density in the optimized LDs, with LD3 exhibiting substantial improvements over the primary LD. Notably, the optimized LDs displayed reduced threshold current and improved slope efficiency compared to the primary LD. The study identified optimal layer thicknesses based on various cost functions, resulting in significant enhancements in output power (0.561 W), slope efficiency (2.515 W/A), and reduced threshold current (less than 0.029 A), indicative of enhanced TQW laser diode performance. Overall, the research showcases the effectiveness of the particle swarm optimization approach in optimizing GaN-based TQW laser diodes, leading to improved efficiency characteristics and demonstrating the potential for enhanced performance in practical applications.

Influence of lattice aligned quantum barrier architecture with alleviated Mg-doped region in laser diode structure for underwater communication

Effect of Asymmetric InAlGaN/GaN Superlattice Barrier Structure on the Optoelectronic Performance of GaN-Based Green Laser Diode

Effects of TMIn Flow Rate During Quantum Barrier Growth on Multi-quantum Well Material Properties and Device Performance in GaN-Based Laser Diodes

Research on AlInGaN quaternary alloys as MQW barriers in GaN-based laser diodes

Advantages of InGaN–GaN–InGaN Delta Barriers for InGaN-Based Laser Diodes

Doped Effects of Quaternary AlInGaN Last Quantum Barrier for Deep-Ultraviolet Laser Diodes Without Electron Blocking Layer

Optical and electrical properties of bandgap shifted 1.55-/spl mu/m laser diodes

Enhancing the Blue GaN Laser Diodes by Modifying the First Barrier Structure and Adjusting the Growth Conditions of Quantum Wells

AlGaN-Based Deep UV Laser Diodes without an Electron Blocking Layer and with a Reduced Aluminum Composition of Quantum Barriers

Design and analysis of a group-III nitride superlattice structure based semiconductor laser diode for blue region emission

Optical and electrical properties of bandgap shifted 1.55-μm laser diodes

Enhanced carrier confinement and radiative recombination in GaN-based lasers by tailoring first-barrier doping.

Influence of Indium Composition in the Prestrained Ingan Interlayer on the Strain Relaxation of Ingan/Gan Multiple Quantum Wells in Laser Diode Structures

Down-scaling of GaN-based Laser Diodes for High-Speed Modulation Characteristics

Optical Confinement Study of Laser MBE Grown InGaN/GaN Quantum Well Structure using Surface Plasmon Resonance Technique

Optimization of high power AlGaInP laser diodes at 626 nm

Low-Threshold 1.3- $\mu$ M GaInNAs Quantum-Well Lasers Using Quaternary-Barrier Structures

High performance deep violet InGaN TQW laser diode through multi-layer thickness optimization using particle swarm optimization method

A Modified Structure with Asymmetric and Doping Barrier Interlayers of GaAs-based Laser Diodes with Both Small Vertical Divergence Angle and Low Threshold Current

A design and comparative investigation of graded AlxGa1 − x N QB for W-Al0.58GaN/W-Al0.64–0.58 GaN DUV laser diode on AlN substrate

Super-gain nanostructure with self-assembled well-wire complex energy-band engineering for high performance of tunable laser diodes