Abstract:Microelectronics and micromechanical systems (MEMS) are gaining popularity by virtue of small size, high integration, diverse functionalities, mass production and low cost. However, the existing current cutting-off fuse components can hardly be used in a microelectronics or micro mechanical system to realize circuit protection due to their large size and high fusing current. Herein we report a novel current cutting-off fuse component based on printed electrically conductive nanocomposites (ECCs), which are composed of silver micro-dendrites with fractal morphology as the fusible conductive fillers and the thermosetting resin matrix. The silver paste was pasted between two copper electrodes with controlled space. The current cutting-off performance of the fuses was investigated within different silver fillers, various paste sizes, and diverse electrode spaces. The results show that, the silver dendrite-based paste can be fused at a relative low current due to its abundant nano-sized rims at the edge of the dendrite branches. Furthermore, the minimum fusing current (530 mA) was achieved when the silver flake-based paste was dispensed between two electrodes with distance of 100 mu m and width of 30 mu m. It is obvious that the fusing current attenuates gradually with the increase of space between two copper electrodes, and the silver paste in large spot size possesses higher fusing current than in small one. The scanning electron microscopy (SEM) analyses suggest that the silver fillers go through the melting and shrinking stages during the fusing process, thus the adjacent silver fillers separate to break the circuit. Considering the low material cost and negligible environmental risk, this novel current cutting-off fuse can provide cost-effective and environmental-friendly protection for MEMS devices.

Additive effect of silicone resin on direct current arc quenching performance of a model electric fuse: electrical resistivity and thermal diffusivity of high-temperature Cu/SiO2 vapor mixed with C2H6SiO vapor decomposition

Mixture of Si 3 N 4 powder and SiO 2 sand as novel DC arc quenching medium for improvement of current limiting performance of model electric fuse

Study of DC Arc Characteristics on Polluted Silicon Rubber Surface

Investigation of Electrical and Thermal Properties of Epoxy Resin/Silicon Carbide Whisker Composites for Electronic Packaging Materials

Enhanced Field-Dependent Conductivity and Material Properties of Nano-Aln/micro-sic/silicone Elastomer Hybrid Composites for Electric Stress Mitigation in High-Voltage Power Modules

Silver dendrite-based nanocomposites for current cutting-off fuse

Development of Ag@Si composite sinter joining with ultra-high resistance to thermal shock test for SiC power device: Experiment validation and numerical simulation

Manifestation of Interactions of Nano-Silica in Silicone Rubber Investigated by Low-Frequency Dielectric Spectroscopy and Mechanical Tests

Effects of Zirconium Silicide on the Vulcanization, Mechanical and Ablation Resistance Properties of Ceramifiable Silicone Rubber Composites

Enhancing Surface Insulation of Epoxy Composite by Constructing Nanofiller‐skeleton Charge Channel

Influence mechanism of UVIV on DC surface flashover performances of silicone rubber: From molecule modification to macroscopic characteristics improvement

Effect of Micro-Si3n4-Nano-Al2o3 Co-Filled Particles on Thermal Conductivity, Dielectric and Mechanical Properties of Silicone Rubber Composites

Blowing of polysilicon fuses

High temperature properties of dry air used as arc quenching medium and its mixture with vaporized C 2 F 4 : reaction products and critical reduced electric field strength at 300-3000 K

Effective improvement of anti-tracking of addition-cure liquid silicone rubber via charge dissipation of fluorosilane-grafted silica

Analysis on Temperature Characteristic of Flake Melt of Fuse-switch Disconnector for Distribution Transformer Protection

Effect of SiC on the anti-ablation resistance and flexural strength of (Hf-Ta-Zr)C-C/C composites

The fluorinated SiO2 self‐assembly surface of epoxy resin with excellent insulating and superhydrophobic properties

Flame retardancy and smoke suppression of silicone foams with modified microencapsulated Mg/Zn/Al-layered double hydroxide

Novel hybrid silicone resin composites with excellent low dielectric and high temperature mechanical properties

Microstructure and ablation behavior of C/C–HfC–SiC composites fabricated by reactive melt infiltration with Hf–Si alloy