Abstract:Two-step solar thermochemical cycling (STC) based on nonstoichiometric oxides is an ideal means of solar fuel (e.g., H2, CO) production. Screening of nonstoichiometric oxides with excellent thermodynamic performance is key to achieving high solar-to-fuel efficiency. However, application-driven materials assessment intended for reactor-level solar fuel production performance requires mimicking realistic operating conditions of on-sun tests in a laboratory setting, which makes oxides assessment and screening an onerous task to accomplish experimentally. In this work, a rapid assessment and screening model of nonstoichiometric oxides for two-step solar thermochemical cycling assuming fixed-bed flow pattern and quasi-equilibration of the solid with the flowing gas phase is developed, with solar-to-fuel efficiency being the target function of optimization. The model accounts for the thermodynamic parameters of oxide materials and typical operating conditions of experimental thermochemical cycling. This study employed the model to explore and compare two groups of typical nonstoichiometric oxides (CeO2- and (LaSr)MnO3-based) for their maximum efficiency under their uniquely optimized cycling conditions. The results show that CeO2 can reach a maximum efficiency of 12.9% at reduction temperature of 1500 °C, which is superior to other candidate materials, including 20 mol% Zr-doped CeO2 (10.1%), La0.6Sr0.4MnO3 (2.5%) and La0.8Sr0.2MnO3 (3.3%). Even when the reduction temperature is lowered to 1350 °C, ceria yields the highest efficiency amongst the candidate STC materials considered. The optimal cycling strategy depends on the inherent thermodynamic properties of the oxides. This approach serves as a framework for assessing the maximum efficiency and optimal conditions of candidate thermochemical materials within a range of constraints rather than comparing materials under arbitrary cycling conditions, which may inherently favor one material over another. For oxidation temperatures below 800–1000 °C, the model could be further improved by considering reaction kinetics.

Sr-doped SmMnO 3 perovskites for high-performance near-isothermal solar thermochemical CO 2 -to-fuel conversion

Bismuth doped Sr2Fe1.5Mo0.5O6-3 double perovskite as a robust fuel electrode in ceramic oxide cells for direct CO2 electrolysis

Bismuth Doped Sr2Fe1.5Mo0.5O6-δ Double Perovskite As a Robust Fuel Electrode in Ceramic Oxide Cells for Direct CO2 Electrolysis

Thermochemical two-step CO2 splitting using La0.7Sr0.3Mn0.9Cr0.1O3 of perovskite oxide for solar fuel production

Cobalt-Based Perovskites as Efficient Oxygen Exchange Redox Materials for Solar Thermochemical Application

Two-Step Thermochemical CO2 Splitting Using Partially-Substituted Perovskite Oxides of La0.7Sr0.3Mn0.9X0.1O3 for Solar Fuel Production

Intensified solar thermochemical CO2 splitting over iron-based redox materials via perovskite-mediated dealloying-exsolution cycles

Enhanced Solar Conversion of CO2 to CO Using Mn‐doped TiO2 Based on Photo‐thermochemical Cycle

Visible Light-Responding Perovskite Oxide Catalysts for Photo-Thermochemical CO2 Reduction

Compositionally Complex Perovskite Oxides for Solar Thermochemical Water Splitting

Thermodynamic assessment of nonstoichiometric oxides for solar thermochemical fuel production

Boosting Solar Photothermal Synergy for Efficient Overall Water Splitting Based on Mg, Al Codoped and Rh/Cr2O3/CoOOH Coloaded SrTiO3

Guiding Effective Nanostructure Design for Photo-Thermochemical CO2 Conversion: from DFT Calculations to Experimental Verifications

Application of CoFe2O4-NiO nanoparticle-coated foam-structured material in a high-flux solar thermochemical reactor

Redox Performance and Optimization of the Chemical Composition of Lanthanum–Strontium–Manganese-Based Perovskite Oxide for Two-Step Thermochemical CO2 Splitting

Experimental study of a high-temperature porous-medium filled solar thermochemical reactor for CO production

CO2‐to‐CO conversion with over 10% efficiency using earth abundant system in a single‐compartment reactor with oxygen tolerant Mn complex catalyst

Tuning the Phase Transition of SrFeO3-δ by Mn toward Enhanced Catalytic Activity and CO2 Resistance for the Oxygen Reduction Reaction

Enhanced oxygen migration in tailored lanthanum-based perovskite for solar-driven dry reforming of methane

Exceptional Co-Catalyst Free Photocatalytic Activities of B and Fe Co-Doped SrTiO3 for CO2 Conversion and H2 Evolution

Thermochemical CO2 reduction over NiFe2O4@alumina filled reactor heated by high-flux solar simulator