Abstract:The electrochemical reduction of CO 2 using copper-based electrocatalysts offers a route to produce high-value multicarbon (C 2+ ) products from renewable electricity (Nat. Catal. 4, 952-958 (2021); Nature 614, 262-269 (2023)). To date, the efficient electrocatalytic conversion of CO 2 to multicarbon products has only been possible when using impurity-free CO 2 sources, such as from direct air capture. The generation of such high-grade CO 2 streams is expensive, accounting for almost half of the total energy required for both capture and electroreduction processes (Nat. Catal. 4, 952-958 (2021)). Conversely, capturing CO 2 from point sources, such as industrial flue gas, is more efficient due to the higher concentration of CO 2 in the feed. However, trace amounts of sulfur dioxide (10 ~ 400 ppm SO 2 ) inherently present in these streams will significantly degrade the CO 2 conversion process. All previous attempts to convert CO 2 with SO 2 present in the feed have resulted in immediate catalyst poisoning and an irreversible loss of CO 2 conversion activity. In this study, we designed a modified catalyst layer to react a stream of dilute CO 2 containing 400 ppm SO 2 to multicarbon products with high stability and performance metrics that match or exceed those achieved with pure CO 2 streams. Driven by density function theory and COMSOL simulations, we designed an ionomer:copper:polytetrafluoroethylene (PTFE) (ICP) electrode that features both hydrophobic and highly-charged hydrophilic domains to limit water adsorption and promote CO 2 over SO 2 transport near the electrochemically active sites. This deactivates the SO 2 poisoning mechanism, thus enabling stable and efficient CO 2 conversion (see figure). Our approach achieved a sustained C 2+ Faradaic efficiency (FE) of 50% for the initial 160 hours at 100 mA cm-2. In order to improve the overall C 2+ current efficiency (j C2+ ) towards industrial scales, we applied our strategy in high-surface-area copper electrodes. We achieved CO 2 conversion in the presence of 400 ppm SO 2 with a C 2+ FE of 76% at a current density of 700 mA cm-2, surpassing what can be achieved in existing integrated CO 2 capture-electrolysis systems that use pure CO 2 . Overall, our approach provides a fully 140-fold increase in performance (FE C2+ × j C2+ ) compared to the best prior CO 2 conversion systems with added SO 2 (Nat. Nanotechnol. doi: 10.1038/s41565-022-01286-y (2023); J. Am. Chem. Soc. 141, 9902-9909 (2019)). These findings represent an important advancement in the field of CO 2 conversion and highlight the potential of our strategy for industrial-scale applications. Figure 1

CO2‐to‐CO conversion with over 10% efficiency using earth abundant system in a single‐compartment reactor with oxygen tolerant Mn complex catalyst

20% Efficient Solar CO2 Electrolysis with Earth-Abundant Materials Enabled by Molecular Catalyst

Solar conversion of CO2 to CO using Earth-abundant electrocatalysts prepared by atomic layer modification of CuO

Highly efficient solar-driven CO2-to-fuel conversion assisted by CH4 over NiCo-ZIF derived catalysts

Solar-Driven Reduction of 1 Atm Co2 to Formate at 10% Energy-Conversion Efficiency by Use of A Tio2-Protected Iii-V Tandem Photoanode in Conjunction with A Bipolar Membrane and A Pd/C Cathode Electrocatalyst

Hybrid Solar-to-methane Conversion System with a Faradaic Efficiency of Up to 96%

Efficient Solar-Driven Electrocatalytic CO2 Reduction in a Redox-Medium-assisted System

Air to fuel: Direct capture of CO2 from air and in-situ solar-driven conversion into syngas via Nix/NaA nanomaterials

Solar energy powered electrochemical reduction of CO2 on In2O3 nanosheets with high energy conversion efficiency at a large current density

No catalyst addition and highly efficient dissociation of H2O for the reduction of CO2 to formic acid with Mn.

SO2-Tolerant Electrocatalytic Reduction of CO2 from Simulated Industrial Flue Gas

Integration of Anodic and Cathodic Catalysts of Earth-Abundant Materials for Efficient, Scalable CO2 Reduction

Silicon photocathode functionalized with osmium complex catalyst for selective catalytic conversion of CO2 to methane

Concentrated solar CO2 reduction in H2O vapour with >1% energy conversion efficiency

Light-Driven CO2 Reduction with a Surface-Displayed Enzyme Cascade-C3N4 Hybrid

A Study of the Reaction Kinetics and Solar Concentrator‐Based Reactor Design for Photocatalytic Conversion of CO2 Into Fuel

Light-Driven CO<sub>2</sub> Reduction with a Surface-Displayed Enzyme Cascade–C<sub>3</sub>N<sub>4</sub> Hybrid

Efficient Electroreduction CO2 to CO over MnO2 Nanosheets

Selective light absorber-assisted single nickel atom catalysts for ambient sunlight-driven CO 2 methanation

High efficient sunlight-driven CO2 hydrogenation to methanol over NiZn intermetallic catalysts under atmospheric pressure