Abstract:The solar thermochemical two-step splitting of H2O and CO2 based on metal oxide compounds is a promising path for clean and efficient generation of hydrogen and renewable synthetic fuels. The two-step process is based on the endothermic solar thermal reduction of a metal oxide releasing O2 using a high-temperature concentrated solar heat source, followed by the exothermic oxidation of the reduced oxide with H2O and/or CO2 to generate pure H2 and/or CO. This pathway relates to one of the emerging and most promising processes for solar thermochemical fuel production encompassing green H2 and the recycling/valorization of anthropogenic greenhouse gas emissions. It represents an efficient route for solar energy conversion and storage into renewable and dispatchable fuels, by directly converting the whole solar spectrum using heat delivered by concentrating systems. This eliminates the need for photocatalysts or intermediate electricity production, thus bypassing the main limitations of the low-efficient photochemical and electrochemical routes currently seen as the main green methods for solar fuel production. In this context, among the relevant potential redox materials, thermochemical cycles based on volatile and non-volatile metal oxides are particularly attractive. Most redox pairs in two-step cycles proceed with a phase change (solid-to-gas or solid-to-liquid) during the reduction step, which can be avoided by using non-stoichiometric oxides (chiefly, spinel, fluorite, or perovskite-structured materials) through the creation of oxygen vacancies in the lattice. The oxygen sub-stoichiometry determines the oxygen exchange capacity, thus determining the fuel production output per mass of redox-active material. This paper provides an overview of the most advanced cycles involving ZnO/Zn, SnO2/SnO, Fe3O4/FeO, ferrites, ceria, and perovskites redox systems by focusing on their ability to perform H2O and CO2 splitting during two-step thermochemical cycles with high fuel production yields, rapid reaction rates, and performance stability. Furthermore, the possible routes for redox-active material integration and processing in various solar reactor technologies are also described.

Thermochemical two-step CO2 splitting using La0.7Sr0.3Mn0.9Cr0.1O3 of perovskite oxide for solar fuel production

Two-Step Thermochemical CO2 Splitting Using Partially-Substituted Perovskite Oxides of La0.7Sr0.3Mn0.9X0.1O3 for Solar Fuel Production

Redox Performance and Optimization of the Chemical Composition of Lanthanum–Strontium–Manganese-Based Perovskite Oxide for Two-Step Thermochemical CO2 Splitting

Cobalt-Based Perovskites as Efficient Oxygen Exchange Redox Materials for Solar Thermochemical Application

Notable Hydrogen Production on LaxCa1−xCoO3 Perovskites Via Two-Step Thermochemical Water Splitting

La1-Xcaxmn1-Yalyo3 Perovskites As Efficient Catalysts for Two-Step Thermochemical Water Splitting in Conjunction with Exceptional Hydrogen Yields

Intensified solar thermochemical CO2 splitting over iron-based redox materials via perovskite-mediated dealloying-exsolution cycles

Compositionally Complex Perovskite Oxides for Solar Thermochemical Water Splitting

Thermochemical Activity of Single- and Dual-Phase Oxide Compounds Based on Ceria, Ferrites, and Perovskites for Two-Step Synthetic Fuel Production

Sr-doped SmMnO 3 perovskites for high-performance near-isothermal solar thermochemical CO 2 -to-fuel conversion

Thermochemical Properties of High Entropy Oxides Used as Redox-Active Materials in Two-Step Solar Fuel Production Cycles

Visible Light-Responding Perovskite Oxide Catalysts for Photo-Thermochemical CO2 Reduction

Thermochemical CO2 Splitting Reaction with Supported LaxA1−xFeyB1−yO3 (A = Sr, Ce, B = Co, Mn; 0 ⩽ X, Y ⩽ 1) Perovskite Oxides

Redox Cycles, Active Materials, and Reactors Applied to Water and Carbon Dioxide Splitting for Solar Thermochemical Fuel Production: A Review

Sr- and Co-doped LaGaO3−δ with High O2 and H2 Yields in Solar Thermochemical Water Splitting

Ca- and Ga-Doped LaMnO3 for Solar Thermochemical CO2 Splitting with High Fuel Yield and Cycle Stability

Enhanced Thermochemical Water Splitting Through Formation of Oxygen Vacancy in La0.6 Sr0.4 BO3-δ (b=cr, Mn, Fe, Co, and Ni) Perovskites.

Solar-driven H2O/CO2 conversion to fuels via two-step electro-thermochemical cycle in a solid oxide electrochemical cell

Boosting Solar Photothermal Synergy for Efficient Overall Water Splitting Based on Mg, Al Codoped and Rh/Cr2O3/CoOOH Coloaded SrTiO3

Catalytic Function of Irox in the Two-Step Thermochemical Co2-Splitting Reaction at High Temperatures

The study of CO2 splitting kinetics on LSM perovskite oxides in the solar-driven two-step thermochemical cycle