Abstract:Thermochemical two-step CO2 splitting is a potential approach that fixes the sustainable resource into transportable liquid fuels. However, the harsh CO2 splitting conditions, the limited oxygen release kinetics and capacity of metal oxides block further promoted the CO yield and solar-to-fuel energy efficiency. Here, we propose a different carbon cycle assisted by Ni/La2O3 via coupling methane decomposition with thermochemical CO2 splitting, replacing conventional metal oxides cycle. Superior performance was demonstrated with methane conversion reached around 94% with almost pure H2 generation. Encouragingly, CO2 conversion of 98% and CO yield of 6.9 mmol g−1 derived from CO2 were achieved, with peak CO evolution rate (402 mL min−1 g−1) of orders of magnitude higher than that in metal oxide process and outstanding thermodynamic solar-to-fuel energy efficiency (55.5% vs. 18.5%). This was relevant to the synergistic activation of La2O3 and Ni for CO2 in carbon cycle, thus improving CO2 splitting reaction with carbon species.

What problem does this paper attempt to address?

### Problems the Paper Aims to Solve This paper aims to propose a new carbon cycling process to enhance thermochemical carbon dioxide (CO₂) decomposition. Specifically, this method combines methane decomposition with thermochemical CO₂ decomposition, replacing the traditional metal oxide cycling process. #### Main Objectives: 1. **Overcoming the Limitations of Traditional Metal Oxide Cycling**: Traditional metal oxide cycling has limited oxygen release capacity at high temperatures, resulting in low fuel yield and solar-to-fuel energy efficiency. The new method proposed in this paper uses carbon species generated from methane decomposition to promote the CO₂ decomposition reaction, thereby increasing CO yield and solar-to-fuel energy efficiency. 2. **Efficient Methane Utilization**: The new method not only improves CO₂ decomposition performance but also achieves the separation and generation of nearly pure hydrogen and carbon monoxide at relatively low temperatures without the need for gas separation steps, making methane utilization more efficient. 3. **Experimental Verification**: The superior performance of the proposed Ni/La₂O₃ material in the carbon cycling process was experimentally verified, and detailed characterization analysis was conducted. #### Experimental Results: - Methane conversion rate reached 94%, generating nearly pure hydrogen. - CO₂ conversion rate was as high as 98%, with CO yield reaching 6.9 mmol/g. - The peak CO generation rate was 402 mL min⁻¹g⁻¹, far exceeding that of the traditional metal oxide process. - The theoretical solar-to-fuel energy efficiency of the carbon cycling process was 55.5%, significantly better than the 18.5% of the traditional metal oxide process. In summary, by introducing a novel carbon cycling process, this paper addresses key challenges in the traditional thermochemical CO₂ decomposition process, providing a new pathway for efficient solar-to-fuel conversion.

A novel carbon cycle process assisted by Ni/La2O3 catalyst for enhanced thermochemical CO2 splitting

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

Self-generated Ni Nanoparticles/lafeo3 Heterogeneous Oxygen Carrier for Robust CO2 Utilization under a Cyclic Redox Scheme

Ni-Fe bimetallic hexaaluminate for efficient reduction of O2-containing CO2 via chemical looping

Lanthanum-mediated enhancement of nickel nanoparticles for efficient CO 2 methanation

A Novel Ni–MoCxOy Interfacial Catalyst for Syngas Production Via the Chemical Looping Dry Reforming of Methane

Intensified solar thermochemical CO2 splitting over iron-based redox materials via perovskite-mediated dealloying-exsolution cycles

Efficient CO 2 to CO Conversion at Moderate Temperatures Enabled by the Cobalt and Copper Co-Doped Ferrite Oxygen Carrier

Boosted Solar Thermochemical Low‐temperature CO2 Splitting On Pt/CeO2 By Interface Catalysis

Enhanced activity and stability of Ni/La2O2CO3 catalyst for CO2 methanation by metal-carbonate interaction

Photothermal Conversion of CO2 with High Activity and Stability over Ni-based Composite Nanochains

Cooperative Catalysis of Nickel and Nickel Oxide for Efficient Reduction of CO2 to CH4

Nickel oxide/copper nanocluster anchored in carbon-nitride nanosheets realizing ultrahigh stability and broad potential range for zero-gap membrane flow reactor towards CO 2 -into-CO electroreduction

NiO@Ni nanoparticles embedded in N-doped carbon for efficient photothermal CO2 methanation coupled with H2O splitting

Nickel Oxide/copper Nanocluster Anchored in Carbon-Nitride Nanosheets Realizing Ultrahigh Stability and Broad Potential Range for Zero-Gap Membrane Flow Reactor Towards CO2-into-CO Electroreduction

Boosting photo-thermal co-catalysis CO2 methanation by tuning interface electron transfer via Mott-Schottky heterojunction effect

Highly efficient solar-driven CO2-to-fuel conversion assisted by CH4 over NiCo-ZIF derived catalysts

Highly stable and selective CoxNiyTiO3 for CO2 methanation: Electron transfer and interface interaction

Redox Performance and Optimization of the Chemical Composition of Lanthanum–Strontium–Manganese-Based Perovskite Oxide for Two-Step Thermochemical CO2 Splitting

Efficient photothermal CO2 methanation over NiFe alloy nanoparticles with enhanced localized surface plasmon resonance effect

Application of CoFe2O4-NiO nanoparticle-coated foam-structured material in a high-flux solar thermochemical reactor