Abstract:Methane dry reforming, co-converting greenhouse gases CH4 and CO2 into chemically active syngas (H2/CO), affords a promising route for producing chemicals and fuels from carbon resources. Ni catalysts are the most active for this reaction but suffer from the dilemma of rapid deactivation caused by metal sintering at higher temperatures (>973 K) or coke accumulation at relatively lower temperatures (673–973 K). Here, we report a catalyst configuration—Ni particles (15 nm) confined by a 1–2 nm-thick multielement-oxide (MEO) layer—allows a stable operation at 873–1073 K with a stoichiometric CH4/CO2 ratio of 1.0, that is, the severe conditions for catalyst deactivation but of industrial interest for process efficiency and atomic economy. The in situ-evolved MEO layer resembles the property of high-entropy oxide, which stabilizes the Ni particles with appropriate size and high-index facets, even at 1173 K. Meanwhile, in situ TEM under near atmospheric pressure combining intelligent gravity analysis (IGA)-mass spectrometry (MS) characterizations prove that this unique structure balanced the activation of CH4 and CO2. Thus, the lifetime of the catalyst has been efficiently prolonged with nearly coke-free operations, even at 873 K, the most severe coking temperature. This high-entropy design and stabilization effect offers a facile strategy to precisely fabricate active and robust metal catalysts with wide operation temperatures for many challenging reactions.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acscatal.1c02995.Structural characterizations, in situ experiments, and the comparison of catalytic performances under MDR reactions conditions of OxNi and the reference Ni catalysts (PDF)In situ TEM observations for the OxNi catalyst carried out over ARM 300F using an insitu sample holder (MP4)In situ TEM observations for the OxNi catalyst carried out at 1173 K with the pressure of 760 mbar (MP4)In situ TEM observations for the reference Ni catalyst carried out at 1173 K with the pressure of 760 mbar in a CH4 atmosphere (MP4)This article has not yet been cited by other publications.

A Novel Ni–MoCxOy Interfacial Catalyst for Syngas Production Via the Chemical Looping Dry Reforming of Methane

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

High-reactive and Coke-Resistant Polyhedral NiO/Fe2O3 Oxygen Carrier for Enhancing Chemical Looping CH4–CO2 Dry Reforming

NiO/κ-CeZrO4 functional oxygen carriers with Niδ+ and oxygen vacancy synergy for chemical looping partial oxidation reforming of methane

Uniformly dispersed NiFeAlO 4 as oxygen carrier for chemical looping steam methane reforming to produce syngas

Tuning reverse water gas shift and methanation reactions during CO2 reduction on Ni catalysts via surface modification by MoOx

Highly Active and Anticoke Ni/CeO 2 with Ultralow Ni Loading in Chemical Looping Dry Reforming via the Strong Metal–Support Interaction

Insights into the Role of Mo in Boosting CHx* Oxidation for CO2 Methane Reforming

Robust and Coke-free Ni Catalyst Stabilized by 1–2 nm-Thick Multielement Oxide for Methane Dry Reforming

Modulating the C and Mo Exposure of Molybdenum Carbide for Efficient Low-Temperature CO2 Reduction to CO

Insights into the Role of Mo in Boosting CH X * Oxidation for CO 2 Methane Reforming

Mo promoting Ni-based catalysts confined by halloysite nanotubes for dry reforming of methane: Insight of coking and H 2 S poisoning resistance

Comparative Study of MxOy (M = Cu, Fe and Ni) Supported on Dolomite for Syngas Production Via Chemical Looping Reforming with Toluene

Co-production of syngas and H2 from chemical looping steam reforming of methane over anti-coking CeO2/La0.9Sr0.1Fe1−xNixO3 composite oxides

Ni-modified Mo2C Catalysts for Methane Dry Reforming

Lattice Strained Ni-Co alloy as a High-Performance Catalyst for Catalytic Dry Reforming of Methane

Elucidating the promoting mechanism of coordination-driven self-assembly MOFs/SiO 2 composite derived catalyst for dry reforming of methane with CO 2

Self-generated Ni Nanoparticles/lafeo3 Heterogeneous Oxygen Carrier for Robust CO2 Utilization under a Cyclic Redox Scheme

Methane Dry Reforming by Ni-Cu Nanoalloys Anchored on Periclase-Phase MgAlO<i><sub>x</sub></i> Nanosheets for Enhanced Syngas Production

Dynamic Oxygen on Surface: Catalytic Intermediate and Coking Barrier in the Modeled Co2 Reforming of Ch4 on Ni (111)

Elucidating the Promoting Mechanism of Coordination-Driven Self-Assembly MOFs/SiO2 Composite Derived Catalyst for Dry Reforming of Methane with CO2