Abstract:CO2 hydrogenation is critical to producing high-value-added carbon-based chemicals and fuels to achieving both hydrogen energy storage and CO2 utilization. Examples of CO2 hydrogenation include methanation (Sabatier process) to produce methane, reverse water-gas shift reaction (RWGS) to generate CO, methanol synthesis for the methanol economy, and CO2 direct Fischer-Tropsch (CO2-FT) reaction to produce olefins. The precious metal catalysts used in these reactions are efficient but too expensive to be used on a large scale. Further, although some non-precious metal catalysts can be used for these hydrogenation reactions, they suffer from deactivation during long-term processes. Over the past few decades, molybdenum carbides, which are transition metal carbides (TMCs), have attracted significant attention owing to their low cost and similar catalytic performance to precious metal catalysts in CO2 hydrogenation reactions. Recently, two-dimensional molybdenum carbide MXenes have shown impressive activity in CO2 hydrogenation reactions. Owing to the presence of carbon, the MXene lattice is expanded; this leads to an increase in valence electrons and endows the two-dimensional molybdenum carbide-based catalyst with different properties than metallic Mo. The two-dimensional molybdenum carbide-based materials can be prepared by temperature-programmed carburization, selective etching, mechanical alloying synthesis, chemical vapor deposition, in situ thermal carburization, and solution-phase synthesis methods. Thus far, a host of studies have been performed on CO2 conversion with molybdenum carbide-based materials, which show promising activity during CO2 conversion and selectivity towards target products. Both alpha-MoC1-x and beta-MoCy have shown outstanding thermocatalytic activity, product selectivity, and reaction stability during CO2 hydrogenation to CO at 300-600 degrees C. In addition, molybdenum carbide-based materials were also found to be an interesting catalyst for direct CO2 Fischer-Tropsch synthesis. The application potential of the molybdenum carbide-based materials could be further tuned by changing the C/Mo ratio in the bulk molybdenum carbide, strengthening the interactions between molybdenum carbide and the supported metal, and tailoring the interface structure of the materials. However, the thermal catalytic CO2 conversion based on molybdenum carbide-based materials is still in its infancy. This paper summarizes the progress toward molybdenum carbide catalysis of CO2 hydrogenation process for producing high-value-added chemicals and fuels. Furthermore, the challenges and opportunities for molybdenum carbide materials as catalysts for CO2 hydrogenation are discussed to provide insights for future development in this emerging field.

An active, stable cubic molybdenum carbide catalyst for the high-temperature reverse water-gas shift reaction

Highly Exposed NH2 Edge on Fragmented G‐c3n4 Framework with Integrated Molybdenum Atoms for Catalytic CO2 Cycloaddition: DFT and Techno‐Economic Assessment

Enhanced Selective Hydrogenation of CO2 to CH4 on Molybdenum Carbide Hollow Sphere Catalyst

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

Reaction-induced unsaturated Mo oxycarbides afford highly active CO2 conversion catalysts

Molybdenum carbide catalyst for the reduction of CO2 to CO: surface science aspects by NAPPES and catalysis studies.

Optimization of Potassium Promoted Molybdenum Carbide Catalyst for the Low Temperature Reverse Water Gas Shift Reaction

In-Situ Dynamic Carburization of Mo Oxide with Unprecedented High CO Formation Rate in Reverse Water-Gas Shift Reaction

Optimizing Mo 2 C-based catalytic system for efficient CO 2 conversion and CO selectivity through carbon-nitrogen supporting and potassium promotion

Design of Cu/MoOx for CO2 Reduction via Reverse Water Gas Shift Reaction

Highly Active, Selective and Stable Reverse Water Gas Shift Catalyst Based on High Surface Area MoC/γ-Al2O3 Synthesized by Reverse Microemulsion

Modulating the C and Mo Exposure of Molybdenum Carbide for Efficient Low-Temperature CO2 Reduction to CO

Insight Understanding of Ultrathin Carbon-Deficient Molybdenum Carbide Catalytic Activity for CO2 Conversion into Hydrocarbon Fuels

Review on Using Molybdenum Carbides for the Thermal Catalysis of CO2 Hydrogenation to Produce High-Value-Added Chemicals and Fuels

Pt‐Mo2N Catalyst Formed by Inverse Sintering for the Reverse Water‐Gas Shift Reaction

A Novel Ni–MoCxOy Interfacial Catalyst for Syngas Production Via the Chemical Looping Dry Reforming of Methane

Exploring the 3D printing of molybdenum carbide-based catalysts for the reverse water gas shift reaction: A multi scale study

Optimizing Mo-C coordination for enhanced low-temperature water-gas shift activity over α-MoC 1-x catalysts: An experimental and theoretical study

Polyoxometalate-HKUST-1 composite derived nanostructured Na–Cu–Mo2C catalyst for efficient reverse water gas shift reaction

A noble-metal-free catalyst with MoC nanorod for low-temperature water gas shift reaction

Morphological Modulation of Co 2 C by Surface-Adsorbed Species for Highly Effective Low-Temperature CO 2 Reduction