Abstract:Abstract The understanding of the heat and mass transfer phenomena between hot bubbles and a liquid is particularly relevant to the design of direct contact heating and evaporation systems such as submerged combustion equipment. In this process, exhaust gas from a burner is dispersed in a liquid to be heated or evaporated. Various models for the prediction of the temperature and vapor content of the bubbles as a function of their residence time in the liquid are presented. Based on the experimental measurements of the bubble size and of the heating time and evaporation rate in an actual submerged combustion system, models using spherical, ellipsoidal and spherical‐cap bubbles, with or without internal circulation, are discussed and assessed. It is found experimentally that the bubbles are of a spherical cap shape. Bubble equivalent diameters between 15 and 25 mm and bubble velocities between 0.4 and 1.2 m/s are observed. The proposed models are used to compute the heating time and evaporation rate of the bath during a submerged combustion operation; the predictions are then compared to the experimental values. The rigid spherical cap bubble model is found to predict satisfactorily the heat and mass exchanges between the bubbles and the liquid.La compréhension des phénoménes de transfert de chaleur et de matière entre des bulles chaudes et un liquide est particulièrement importante pour la conception des systèmes de chauffage et d'evaporation à contact direct tels que l'équipement de combustion submergée. Dans ce procédé, un gaz de combustion venant d'un brûleur est dispersé dans un liquide devant être chauffé ou évaporé. Nous présentons différents modèles de prédiction de la teneur en humidité et de la température des bulles en fonction de leur temps de résidence dans le liquide. En nous appuyant sur les mesures expérimentales de la taille des bulles, du temps de chauffe et de la vitesse d'evaporation dans un système de combustion submergée réel, nous examinons et évaluons des modéles utilisant des bulles sphériques, ellipsoidales et calotte sphé‐rique, avec ou sans circulation interne. Nous avons trouvé de façon expérimentale que les bulles sont de forme calotte sphérique. Nous avons observé des diamètres équivalents de bulles compris entre 15 et 25 mm et des vitesses de bulles comprises entre 0,4 et 1,2 m/s. Nous utilisons les modelès proposés pour calculer le temps de chauffe et la vitesse d'evaporation du bain durant l'opération de combustion submergée; les prédictions sont ensuite comparées aux valeurs expérimentales. Le modèle de bulles calotte sphérique rigide permet de prédire de façon satisfaisante les échanges de chaleur et de matière entre les bulles et le liquide.

Hydrodynamics and mass transfer in an upward venturi/bubble column combination

Hydrodynamics in Bubble Columns with Pin-Fin Tube Internals

Study on bubble size distribution and local gas holdup in bubble column

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

Experimental Investigation of Flow Development in Large-Scale Bubble Columns in the Churn-Turbulent Regime

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Impact of gas distributor configuration on hydrodynamics in bubble column with pipe internals

Application of CFD Simulation for Optimisation of the Multi-Pipe Gas Distributors in a Large-Scale Shallow Bubble Column

Evolution and Interaction Characteristics of Liquid Flow and Bubbles in a Jet Bubbling Column

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Bubble size and its distribution for Venturi bubble generator

Simulations of Bubble Column Reactors Using a Volume of Fluid Approach: Effect of Air Distributor

CFD simulation of effects of the configuration of gas distributors on gas–liquid flow and mixing in a bubble column

CFD Simulation of Gas-Liquid Flow in Bubble Column

Numerical Simulations Of Fluid Dynamics And Mixing In A Large Shallow Bubble Column: Effects Of The Sparging Pipe Allocations For Multiple-Pipe Gas Distributors

Hydrodynamics and mass transfer performance of microbubble flow in the bubble column with a contraction section

Flow pattern study, gas hold-up and gas liquid mass transfer correlations in a bubble column: Effect of non — coalescing water — organic mixtures

Heat and mass transfer between bubbles and a liquid

A new, optimized Doppler optical probe for phase detection, bubble velocity and size measurements: investigation of a bubble column operated in the heterogeneous regime

Mass transfer, mixing and heat transfer phenomena in low viscosity bubble column reactors

Hydrodynamics and Model of Gas‐liquid Flow in Microbubble Column Reactors