Abstract:2.25Cr-1Mo-0.25V steel is the main material of hydrogenation reactor due to its good high temperature properties and hydrogen embrittlement resistance. As we all know, there is a great performance gap between virgin material and actual product. Nevertheless, current design methods cannot evaluate the impact of manufacturing. In engineering practice, tensile testing is widely implemented on online surveillance samples or experimentally simulated samples to acquire the actual material characteristics. However, sampling from service hydrogenation reactor, as well as simulating actual manufacturing process, is time-consuming, labor-intensive, and difficult. To systematically analyze the effect of fabrication on 2. 25Cr-1Mo-0. 25V steel, a prediction method that can consider manufacturing residual effects needs to be proposed. Nowadays, many data-driven methods, such as back propagation neural network (BPNN), support vector machine (SVM) and random forest (RF), are employed in predicting material behavior during hot forming, whereas they are scarcely applied on 2.25Cr-1Mo-0.25V steel. In this work, the mentioned three machine learning procedures were constructed to simulate the behavior of actually manufactured 2. 25Cr-1Mo-0.25V steel in uniaxial tensile test. Firstly, tensile samples were extracted from different locations of an actually manufactured hydrogenation reactor, and stretched at 454 degrees C and 482 degrees C. Subsequently, BPNN, SVM and RF models were developed on the obtained tensile curves, respectively. Their inputs were manufacturing parameter, sampling location, service temperature and tensile strain, whereas their output was tensile stress. Finally, the predictability of models was evaluated by test set data which were not involved in model training process. The results show that the predictions of BPNN, SVM and RF all agree well with experimental data. BPNN exhibits lowest prediction error and highest generalization power, SVM is somewhere in between, while RF is the worst. This work will contribute to the application of data-driven methods in material property prediction of 2. 25Cr-1Mo-0.25V steel.

A strategy combining machine learning and multiscale calculation to predict tensile strength for pearlitic steel wires with industrial data

Tensile strength prediction of steel sheets: An insight into data-driven models, dimensionality reduction, and feature importance

Artificial intelligence for the prediction of tensile properties by using microstructural parameters in high strength steels

Machine-Learning-Assisted Composition Design for High-Yield-Strength TWIP Steel

Prediction and Analysis of Tensile Properties of Austenitic Stainless Steel Using Artificial Neural Network

APPLICATION OF DIFFERENT DATA-DRIVEN METHODS IN MATERIAL PERFORMANCE PREDICTION OF 2.25CR-1MO-0.25V STEEL AFTER FORMING AND TEMPERING

Machine learning algorithms for the prediction of the strength of steel rods: an example of data-driven manufacturing in steelmaking

Microstructural Evolution, Strengthening Mechanisms and Strength Structure Relationship in Cold-Drawn Pearlitic Steel Wire

Tensile Property Prediction by Feature Engineering Guided Machine Learning in Reduced Activation Ferritic/martensitic Steels

A strategy assisted machine learning to process multi-objective optimization for improving mechanical properties of carbon steels

Mesoscopic Tensile Deformation of Steel Cord with Diverse Layered Nonuniformity Based on Microcomputed Tomography Optimizing Simulation Model

Dislocation-Based Plasticity and Strengthening Mechanisms in Sub 20 Nm Lamellar Structures in Pearlitic Steel Wire

Prediction of the fatigue curve of high-strength steel resistance spot welding joints by finite element analysis and machine learning

Machine-learning-assisted design of high strength steel I-section columns

Structure and strength of sub-100 nm lamellar structures in cold-drawn pearlitic steel wire

Application of machine learning-based algorithms to predict the stress-strain curves of additively manufactured mild steel out of its microstructural characteristics

On the use of transfer modeling to design new steels with excellent rotating bending fatigue resistance even in the case of very small calibration datasets

Prediction of Mechanical Properties of Steel Tubes Using a Machine Learning Approach

Physics-informed deep operator network for predicting martensite evolution in superelastic shape memory alloys through cyclic tensile tests

ARTIFICIAL NEURAL NETWORK MODEL FOR PREDICTION OF MECHANICAL PROPERTIES OF STEEL

A mathematical model for the prediction of mechanical properties on ASTM A510/A853 cold-drawn hypoeutectoid steel wire after batch annealing