Abstract:2.25Cr-1Mo-0.25V steel is the main material of hydrogenation reactor due to its good high temperature properties and hydrogen embrittlement resistance. As we all know, there is a great performance gap between virgin material and actual product. Nevertheless, current design methods cannot evaluate the impact of manufacturing. In engineering practice, tensile testing is widely implemented on online surveillance samples or experimentally simulated samples to acquire the actual material characteristics. However, sampling from service hydrogenation reactor, as well as simulating actual manufacturing process, is time-consuming, labor-intensive, and difficult. To systematically analyze the effect of fabrication on 2. 25Cr-1Mo-0. 25V steel, a prediction method that can consider manufacturing residual effects needs to be proposed. Nowadays, many data-driven methods, such as back propagation neural network (BPNN), support vector machine (SVM) and random forest (RF), are employed in predicting material behavior during hot forming, whereas they are scarcely applied on 2.25Cr-1Mo-0.25V steel. In this work, the mentioned three machine learning procedures were constructed to simulate the behavior of actually manufactured 2. 25Cr-1Mo-0.25V steel in uniaxial tensile test. Firstly, tensile samples were extracted from different locations of an actually manufactured hydrogenation reactor, and stretched at 454 degrees C and 482 degrees C. Subsequently, BPNN, SVM and RF models were developed on the obtained tensile curves, respectively. Their inputs were manufacturing parameter, sampling location, service temperature and tensile strain, whereas their output was tensile stress. Finally, the predictability of models was evaluated by test set data which were not involved in model training process. The results show that the predictions of BPNN, SVM and RF all agree well with experimental data. BPNN exhibits lowest prediction error and highest generalization power, SVM is somewhere in between, while RF is the worst. This work will contribute to the application of data-driven methods in material property prediction of 2. 25Cr-1Mo-0.25V steel.

Tensile Property Prediction by Feature Engineering Guided Machine Learning in Reduced Activation Ferritic/martensitic Steels

Machine learning of mechanical properties of steels

Artificial intelligence for the prediction of tensile properties by using microstructural parameters in high strength steels

Composition design and optimization of Fe–C–Mn–Al steel based on machine learning

Towards Accurate Prediction for Ultra-Low Carbon Tempered Martensite Property Through the Cross-Correlated Substructures

Predicting mechanical properties of low-alloy steels using features extracted from Electron Backscatter Diffraction characterization

Predictive Modeling of Tensile Strength in Aluminum Alloys via Machine Learning

Prediction and Analysis of Tensile Properties of Austenitic Stainless Steel Using Artificial Neural Network

Machine learning algorithms for the prediction of the strength of steel rods: an example of data-driven manufacturing in steelmaking

A strategy assisted machine learning to process multi-objective optimization for improving mechanical properties of carbon steels

Machine Learning Prediction of the Mechanical Properties of Γ-Tial Alloys Produced Using Random Forest Regression Model

Construction of a Machine-Learning-based Prediction Model for Mechanical Properties of Ultra-Fine-grained Fe–C Alloy

Design of comprehensive mechanical properties by machine learning and high-throughput optimization algorithm in RAFM steels

Tensile strength prediction of steel sheets: An insight into data-driven models, dimensionality reduction, and feature importance

An optimized machine-learning model for mechanical properties prediction and domain knowledge clarification in quenched and tempered steels

ARTIFICIAL NEURAL NETWORK MODEL FOR PREDICTION OF MECHANICAL PROPERTIES OF STEEL

Prediction of the yield strength of as-cast alloys using the random forest algorithm

Prediction of Mechanical Properties of Steel Tubes Using a Machine Learning Approach

On the use of transfer modeling to design new steels with excellent rotating bending fatigue resistance even in the case of very small calibration datasets

APPLICATION OF DIFFERENT DATA-DRIVEN METHODS IN MATERIAL PERFORMANCE PREDICTION OF 2.25CR-1MO-0.25V STEEL AFTER FORMING AND TEMPERING

Prediction of Mechanical Properties of Wrought Aluminium Alloys Using Feature Engineering Assisted Machine Learning Approach