Abstract:In order to study the influences of confining pressure and strain rate on the mechanical properties of the Nitrate Ester Plasticized Polyether (NEPE) propellant, uniaxial tensile tests were conducted using the self-made confining pressure system and material testing machine. The stress-strain responses of the NEPE propellant under different confining pressure conditions and strain rates were obtained and analyzed. The results show that confining pressure and strain rate have a remarkably influence on the mechanical responses of the NEPE propellant. As confining pressure increases (from 0 to 5.4 MPa), the maximum tensile stress and ultimate strain increase gradually. With the coupled effects of confining pressure and strain rate, the value of the maximum tensile stress and ultimate strain at 5.4 MPa and 0.0667 s<sup>-1</sup> is 2.03 times and 2.19 times of their values under 0 MPa and 0.00333 s<sup>-1</sup>, respectively. Afterwards, the influence mechanism of confining pressure on the NEPE propellant was analyzed. Finally, based on the viscoelastic theory and continuous damage theory, a nonlinear constitutive model considering confining pressure and strain rate was developed. The damage was considered to be rate-dependent and pressure-dependent. The constitutive model was validated by comparing experimental data with predictions of the constitutive model. The whole maximum stress errors of the model predictions are lower than 4% and the strain errors are lower than 7%. The results show that confining pressure can suppress the damage initiation and evolution of the NEPE propellant and the nonlinear constitutive model can describe the mechanical responses of the NEPE propellant under various confining pressure conditions and strain rates. This research can lay a theoretical foundation for analyzing the structural integrity of propellant grain accurately under working pressure loading.

Dynamic Engraving Characteristics of Nylon Belt under Different Charge Conditions

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

Strain Hardening and Strain-Rate Effect in Friction Between Projectile and Barrel During Engraving Process

Finite element analysis of the friction and wear of the barrel bore during the projectile extrusion

Numerical Simulation Research on Rotating Band Dynamic Engraving Process of CTA Artillery

Study on the mechanical and thermal parameters of PBX during the vertical extrusion charging process

Density Effect of PTFE-Copper Powder Metallurgy Liner Material on the Perforation Performance of Shaped Charge Jets

Theoretical and numerical research on the dynamic launch response of carbon fiber composite cartridges

The Influence of Closed-Cell W-Shaped Liner Parameters on the Penetration Performance of Integral Annular Shaped Charge

Theoretical Investigation on Failure Behavior of Ogive-Nose Projectile Subjected to Impact Loading

Evaluation and Characterization of Ultrasonic Cutting of Monofilament Nylon

Damage characteristics and failure mechanism analysis of NEPE propellant at high strain rates

Research on the influences of confining pressure and strain rate on NEPE propellant: Experimental assessment and constitutive model

Finite Element Simulation and Experimental Comparison on Perforating Casing of Peroration Bullet

Grey Relation Analysis On Performance Parameters of Explosively Formed Penetrator

High-speed perforation of high-entropy alloy CrMnFeCoNi plates: Experiments and modeling

Transient dynamics analysis for uniform engaging process of MC nylon helical gear

Influence of Filling Material Density on Terminal Effect of PELE Projectile

Research on the crack formation mechanism of shaped charge blasting and the new dual-shaped charge blasting technology

3 Dimensional Finite Element Simulation on Perforating Casing of Peroration Bullet

Research on mass loss and nose shape evolution of kinetic energy projectiles penetrating concrete at high velocity