Abstract:The main material of a type of multifunctional warhead is energy-containing material, which mainly relies on the projectile's own kinetic energy to hit the target plate to achieve the function of penetrating reinforced concrete, so it needs the bullet material to have high strength and be able to withstand the high overload when penetrating reinforced concrete. At present, the composite energy-containing material structure with Al, Zr, Ti, and other materials as PTFE-based reducing agents is the mainstream direction of research on high-strength energy-containing materials. LS-DYNA is used to establish a simulation model to simulate and analyze the tapping power. The relationship curve between material strength and attack depth is established and compared with the experimental data of traditional steel material attack ammunition to finally determine the strength limit of energy-containing material compared with traditional attack ammunition. The simulation results show that the composite energy-containing material multifunctional projectile can accomplish the tapping task of penetrating 1.2 m reinforced concrete under the premise of ensuring that the percentage of W powder is not higher than 80%. This study has a certain reference value for the selection of energy-containing materials for multifunctional warheads. For the low-velocity penetration below 400 m/s, the effect of frictional resistance of the head as well as the sidewall on the penetration depth can be ignored, but the overload curve when considering the sidewall friction is more realistic. Using a combination of experimental and theoretical methods, the influence of the projectile material on the mass erosion of high-speed kinetic energy projectiles was studied, and the Jones erosion model based on the thermal melting principle was improved. Based on the cavity expansion theory, the calculation method of the shape evolution of the bullet head was established. The comparison with the experimental results shows that the improved model is applicable to different types of soft and hard materials and can accurately calculate the mass erosion amount, erosion depth, and shape evolution of the bullet head.

Influence of Filling Material Density on Terminal Effect of PELE Projectile

Investigation on the anti-penetration performance of the steel/nylon sandwich plate

The Influence of Impact Speed on the Penetrator with Enhanced Lateral Effect

Numerical Study on the Perforation of Steel Plates by Multiple Projectiles

The Influence of Ratio of Length to Diameter on the Penetrator with Enhanced Lateral Efficiency

Numerical Simulation of the Influence of the Ratio of Inside to Outside Diameter on Lateral Efficiency of PELE

Numerical Study on the Damage Efficiency of Half-Premade Fragmented PELE

Numerical Simulation of PELE Penetrating Composite Armor

Lateral enhancement effect of reactive PELE: Two-step segmented simulation and analytical modeling

Effect of Projectile Rotation Rate on Lateral Effect of PELE Penetrating Reinforced Concrete Target

Fragmentation Characteristics and Damage Capacity of Radial Layered PELE

Damage of Multi-Layer Spaced Metallic Target Plates Impacted by Radial Layered PELE

Perforation Characteristics of Metal Target Plate Subjected to PELE

Density Effect of PTFE-Copper Powder Metallurgy Liner Material on the Perforation Performance of Shaped Charge Jets

Experimental Study on Damage Effect of PELE with New Structure and Composite Material against Multi-Layered Plates

Influence of Impact Angle on the Lateral Efficiency of PELE

Fragmentation Behaviour of Radial Layered PELE Impacting Thin Metal Target Plates

Influence of Block Structure on Lateral Effect of PELE

Numerical Simulation of Multifunctional Projectile Penetrating Reinforced Concrete Target Plate Based on Sensor Data Acquisition

Analytical investigation on deformation of PELE projectile and opening damage to concrete target

The Penetration–Explosion Effects of Differently Distributed Inactive/Active Composite Shaped Charge Jets