Abstract:Impact velocity (v0), target strength (fc) and target thickness (hc) are important factors affecting opening damage (<math>D¯</math>) of PELE penetration into RC target. In this paper, based on the three influence factors of v0, fc and hc, experimental and numerical simulation studies on PELE penetration into RC target were carried out. The study results show that: (1) Since interaction force (or penetration resistance) between projectile and target is positively correlated with v0 and fc, with the increase of v0 and fc, deformation mode of jacket is changed from small bending deformation to large bending deformation and then to curling deformation. Therefore, the variation of jacket deformation mode causes opening diameter of RC target to increase first and then to decrease. It is found that the two factors approximately satisfy a quadratic function relationship, respectively. (2) For PELE projectile penetrating RC targets with thickness of 80∼400mm, the opening diameter of six sets of RC targets grows from 240 to 500 mm, and hc with <math>D¯</math> approximately satisfy a linear relationship. (3) Based on the above study results, the relationship between two dimensionless parameters (<math>I=mv02d13fc</math> and <math>H=hcl</math> ) and dimensionless opening diameter (<math>D¯/d1</math>) was determined. Combined with the results of previous research, a dimensionless opening diameter model <math>D¯d1=f1(Q,G,I)f2(H)</math> was established. By tests verified, the test results are all within ±10% error of the theoretical model, which verifies the accuracy of the model.

Influence of Block Structure on Lateral Effect of PELE

Investigation on the anti-penetration performance of the steel/nylon sandwich plate

Numerical Study on the Perforation of Steel Plates by Multiple Projectiles

Influence of Impact Angle on the Lateral Efficiency of PELE

Effect of Projectile Rotation Rate on Lateral Effect of PELE Penetrating Reinforced Concrete Target

Experimental Study on Damage Effect of PELE with New Structure and Composite Material against Multi-Layered Plates

Lateral enhancement effect of reactive PELE: Two-step segmented simulation and analytical modeling

Analytical investigation on deformation of PELE projectile and opening damage to concrete target

The Influence of Impact Speed on the Penetrator with Enhanced Lateral Effect

Numerical Study on the Damage Efficiency of Half-Premade Fragmented PELE

Fragmentation Characteristics and Damage Capacity of Radial Layered PELE

Numerical Simulation of PELE Penetrating Composite Armor

Experimental Study on The Effect of Fracture Strain on the Fragmentation Effect of PELE

Numerical Simulation of the Influence of the Ratio of Inside to Outside Diameter on Lateral Efficiency of PELE

Fragmentation Behaviour of Radial Layered PELE Impacting Thin Metal Target Plates

Opening behavior of PELE perforation on reinforced concrete target

Influence of Filling Material Density on Terminal Effect of PELE Projectile

Perforation Characteristics of Metal Target Plate Subjected to PELE

Damage of Multi-Layer Spaced Metallic Target Plates Impacted by Radial Layered PELE

Projectile penetration of reinforced concrete considering the effect of steel reinforcement: Experimental study and theoretical analysis

The Influence of Ratio of Length to Diameter on the Penetrator with Enhanced Lateral Efficiency