Abstract:In its history as an energetic material, porous silicon has demonstrated flame speeds in excess of 3 km s−1, tunable combustion behavior, and high energy output, which in theory makes it a very attractive energetic system. In practice, its application within the field is limited by porous silicon's typical substrate-adhered form and caustic chemical processing requirements that limit how and when porous silicon is made. In this work, we have relieved porous silicon of these constraints by creating reactive silicon quantum dots from free-standing porous silicon films. The resulting material is composed of crystalline silicon nanoparticles with diameters as small as 2 nm that retain the chemical properties of the original films including the SiH2 termination layer. The fabricated silicon particles were characterized using FTIR Spectroscopy, TEM, and EDS for determining the size and the chemical composition. For testing as an energetic material fuel, porous silicon was mixed with an oft used oxidizer, sodium perchlorate. During open-channel combustion tests, silicon quantum dots mixed with sodium perchlorate demonstrated flame speeds over 2.5 km s−1, while bomb calorimetry tests showed an average heat of combustion of 7.4 kJ g−1. These results demonstrate the ability to retain the porous silicon material properties that allow for highly energetic material reactions to occur, despite the additional processing steps to create silicon quantum dots. This opens the door for the use of porous silicon in the bulk of the energetic material application space, much of which was previously limited due to the substrate-attached nature of typical porous silicon.

Energetic characteristics of highly reactive Si nanoparticles prepared by magnesiothermic reduction of mesoporous SiO 2

Preparation of Mesoporous Si Nanoparticles by Magnesiothermic Reduction for the Enhanced Reactivity

In Situ Synthesis of Carbon Doped Porous Silicon Nanocomposites As High-Performance Anodes for Lithium-Ion Batteries.

Porous Si/Al-Si spherical powders with controllable structure and superior reactivity via dealloying of Al-Si

Mg2Si Promoted Magnesio-Mechanical Reduction of Silica into Silicon Nanoparticles for High-Performance Li-ion Batteries

A parametric study of non-thermal plasma synthesis of silicon nanoparticles from a chlorinated precursor

Stirring-enabled formation of homogenous sub-50 nm silicon nanoparticles with a modified alumino-reduction of silica as high-performance anode materials

Silicon quantum dots for energetic material applications

A Study on the Heat Effect during Magnesiothermic Reduction of Porous SiO2

A low temperature MgH2-AlCl3-SiO2 system to synthesize nano-silicon for high-performance Li-ion batteries

Preparation of Nanoporous Silicon and Study on Its Properties

Silica-Derived Hydrophobic Colloidal Nano-Si for Lithium-Ion Batteries

The effect of stoichiometric ratio of Mg/SiO2 and annealing on physical properties of silicon nanoparticles by magnesium-thermic chemical reduction process using the SiO2 precursor

Key Developments in Magnesiothermic Reduction of Silica: Insights into Reactivity and Future Prospects

Low Temperature Chemical Reduction of Fusional Sodium Metasilicate Nonahydrate into a Honeycomb Porous Silicon Nanostructure

Preparation of Si-SiOx nanoparticles from volatile residue produced by refining of silicon

Single-source-precursor synthesis of porous W-containing SiC-based nanocomposites as hydrogen evolution reaction electrocatalysts

Preparations of SiS and SiO2 nanospheres

High performance porous Si@C anodes synthesized by low temperature aluminothermic reaction

Quantitatively Loaded Ultra-Small Ag Nanoparticles on Molecularly Imprinted Mesoporous Silica for Highly Efficient Catalytic Reduction Process