Abstract:This article presents the design of a metamaterials-based hybrid wideband bandpass filter (WB-BPF) supporting several advanced communication applications. The suggested filter uses multiple-mode resonators (MMRs) and metamaterial complementary split-ring resonators (CSRRs). Coupling frequencies are optimized by stretching the coupled lines parallel on both sides. At the same time, the metamaterial complementary split-ring resonator (CSSR) cells are carefully tuned to improve impedance matching, reduce insertion loss, and broaden the bandwidth. The designed compact-sized bandpass filter offers a Quality factor (Q_L) of above 1 while maintaining a wide bandwidth of 6150 MHz. The realized structure requires a small physical area of 20.2×10 mm2. A parametric study, field distribution analysis, and equivalent circuit model of the proposed hybrid BPF are performed. The resulting filter has an exceptional response with five transmission poles, demonstrating superior performance in the targeted frequency range. This wideband bandpass filter, operating from 3.3 GHz to 9.45 GHz, finds potential applications in the emerging fields of the Internet of Things (IoT), wireless fidelity 6 enhanced (Wi-Fi 6E), and high-speed wireless communications, particularly 5G technology, and 5 GHz wireless local area network (WLAN). This research demonstrates significant advances in the development of bandpass filters, offering compact, high-performance solutions for modern communications systems.

Miniaturized Wideband Pole-Zero Following Tunable Bandstop Filter for 5G Millimeter-Wave Application

A CMOS 1.3-1.7GHz Q-Enhanced LC Band-pass RF Filter with 1.5-67% Tunable Fractional Bandwidth

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Tunable 5.8–6.2 GHz Six-Pole Ceramic-Monoblock Filters With Constant Selectivity

Ultra-Wide Stopband Low-Pass Filter Using Multiple Transmission Zeros

Miniaturized IPD bandpass filter design with high out‐of‐band rejection for 5G applications

Miniaturized Bandpass Filter with High Selectivity and Wide Stopband Using Dual-Layer Structure

A Novel Self-Packaged DBBPF With Multiple TZs for 5G Applications

Miniaturized IPD bandpass filter with controllable transmission zero based on modified lumped T‐section

Design of On-Chip Dual-Band Bandpass Filter Using Lumped Elements in LTCC Technology

A miniaturized on‐chip BPF with low insertion loss and wide stopband based on integrated passive device technology

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Miniaturized millimeter-wave dual-band band-pass on-chip filter in 0.13-μm SiGe BiCMOS

Compact high-selectivity tunable dual-mode filter with constant bandwidth by adopting frequency-dependent S-L coupling

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

A creative hybridization of metamaterial CSRR and multiple-mode resonators for designing a compact wideband bandpass filter for 5G/IOT/WLAN/Wi-Fi 6E applications

Miniaturized Circular Substrate Integrated Waveguide Bandpass Filter With Flexible Mixed Coupling and Wide Stopband Rejection

Analysis and design of a wide stop‐band and high out‐of‐band suppression BPF