Study on the operating characteristic of disc seal single screw pump used in energy recovery systems

Zengli Wang,Houwei Shi,Shuyu Wang,Zongming Wang,Muming Hao,Jun Wang

DOI: https://doi.org/10.1016/j.ijrefrig.2020.05.029

IF: 4.14

2020-10-01

International Journal of Refrigeration

Abstract:<p>As a new type of fluid machinery, the disc-seal single screw pump (DSSP) is vital for energy conversion in oil sludge energy recovery systems and natural gas liquefaction system due to the advantages of wide flow range, strong self-absorption and well adaptability to organic solid impurities. However, no research work has focused on the working mechanism and performance of this pump at present, which makes its application limited. In view of this, the in-depth theoretical study on the meshing characteristics and operating performance of the DSSP must be carried out. In this paper, the profile equations of the meshing pair and the working process mathematical model were established for the first time based on three-dimensional space meshing theory, coordinate transformation principle. By using this model, the working performance of this pump was investigated, and the influence mechanism of the profile parameters on the theoretic volume was analyzed. The results of the analysis show that DSSP has the best leakage characteristics when the seal disc rotation center fell on the screw rotor touchline. All these analyses can provide the theory basis for improving the performance of the pump and optimized design of the meshing pair.</p>

engineering, mechanical,thermodynamics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the working characteristics and performance optimization of the Disc - seal Single Screw Pump (DSSP) in the energy recovery system. Specifically, as a new - type fluid machinery, DSSP plays an important role in the oil sludge energy recovery system and the natural gas liquefaction system because it has a wide flow range, strong self - priming ability and good adaptability to organic solid impurities. However, at present, there are few studies on the working mechanism and performance of this pump, which limits its application range. Therefore, in this paper, the meshing pair profile equations and the mathematical model of the working process are established for the first time based on the three - dimensional space meshing theory and the coordinate transformation principle to study the working performance of DSSP and analyze the influence mechanism of the profile parameters on the theoretical displacement, aiming to provide a theoretical basis for improving the performance of the pump and optimizing the design of the meshing pair.

### Main contributions of the paper
1. **Establishment of profile equations**: The profile equations of the DSSP meshing pair are established for the first time, and these equations describe the contact relationship between the sealing disc and the screw.
2. **Establishment of a mathematical model**: According to the profile equations and the working principle, the mathematical model of the drainage volume of DSSP is established.
3. **Performance analysis**: Using the above - mentioned models, the working performance of the pump is studied, and the influence mechanism of the profile parameters on the theoretical displacement and working performance is analyzed.
4. **Optimal design**: These studies provide a theoretical basis for the structural optimization and performance improvement of DSSP, which is helpful to promote its application in the field of high - viscosity fluid transportation.

### Key formulas
- **Relative velocity formula**:
\[
\mathbf{v}_3=\omega_2(-y_2\mathbf{i}+x_2\mathbf{j})
\]
where $\mathbf{v}_3$ is the velocity of any point on the sealing disc in the coordinate system $S_3$, $\omega_2$ is the angular velocity of the sealing disc, $\mathbf{i}$ and $\mathbf{j}$ are the unit vectors in the $X_3$ and $Y_3$ directions respectively, and $x_2$ and $y_2$ are the coordinates of point A in the coordinate system $S_2$.

- **Elementary area formula**:
\[
dA = \frac{1}{2}(\rho^2d\theta+\rho d\rho - d\theta d\rho-\rho d\rho)
\]

- **Elementary volume formula**:
\[
dV = s_r\cdot dA\cdot d\phi
\]
where $s_r$ is the distance from point D to the screw axis and can be expressed as $s_r = a-\rho\sin(\theta)$.

- **Theoretical drainage volume formula**:
\[
V=\int_{0}^{2\pi}\int_{\theta_{\text{min}}}^{\theta_{\text{max}}}\int_{\rho_{\text{min}}}^{\rho_{\text{max}}}f(\rho,\theta,\phi)\,d\rho\,d\theta\,d\phi
\]
where $f(\rho,\theta,\phi)=a\sin(\theta)-\rho$.

### Conclusion
By establishing and analyzing the profile equations and the mathematical model of the working process of DSSP, this paper reveals the influence mechanism of the profile parameters on the theoretical displacement and working performance of the pump. The research results show that when the rotation center of the sealing disc falls on the screw contact line, DSSP has the best leakage characteristics. These analyses provide a theoretical basis for improving the performance and optimizing the design of the pump.