Leakage Analysis and Structure Optimization of Sliding Vane Pump for Oil Recovery

Xiaodong Wu,Shuolong Wang,Ze-bin Ren,Jingfei Tang,Hanlu Wang,Guoqing Han

DOI: https://doi.org/10.2118/191547-18RPTC-MS

2018-10-15

Abstract:Sliding vane pump (SVP) is a new type of all-metal rotary hydraulic pump, which is applied to high-temperature thermal recovery wells possessing high pump efficiency. A leakage model based on the mechanical structure of SVP is presented that employs the principles of fluid dynamics. The leakage gaps of each pump chamber are divided into three parts: the gap between vane and vane slot, the gap between vane and the upper and lower valve plate, and the gap between vane tip and stator inner wall. According to the flow characteristics of fluid in each gap, the correlation equations are established from the perspective of shear and pressure difference respectively. Meanwhile, the optimum allocation of SVP is provided via comparing different structure parameters of pump on the basis of operating characteristic, including stator-rotor eccentricity, rotor-groove radius and vane parity. The significant new finding shows that the greater stator-rotor eccentricity, the greater delivery capacity of SVP, and the disequilibrium of the bearing increasing simultaneously. Therefore, the application of stator-rotor eccentricity in oil field should take into account multiple factors, such as well structure and production mode. Moreover, on the premise of meeting the requirement of pump weight and sand control, rotor-groove radius should be minimized to reduce the adverse effect on volume efficiency. Furthermore, the more vanes of SVP, the smaller period, and the greater average value of instantaneous flow rate. The flow pulsation of SVP with odd vane number is less than it with even vane number, and the recommended number of vanes is 5 to 8.

Environmental Science,Engineering,Materials Science