Abstract:As the increasing demands of the environmental protection, meteorological monitoring, ecological detection and other fields, lidars are needed to simultaneously measure a variety of atmospheric parameters (especially simultaneous measurement of various pollutants, such as volatile organic solvent VOCs). Multi-wavelength Raman lidar, differential absorption lidar (DIAL) and high spectrum resolution lidar (HSRL) can be implemented these fields. But either technique needs multiple laser sources to meet their requirements. This paper proposes a new lidar based on Frequency Comb Light Source, which can provide multiple frequency components through a single light source for simultaneously measuring various multiple atmospheric parameters. The frequency comb laser light source is used to emit seed light of frequency ωc from the seed laser, and then after passing through the frequency comb laser, a series of equally spaced spectral frequency components are emitted centered on c; then emitted into the atmosphere, and the laser reacts with the atmosphere. The echo signal enters the receiving optical path through the telescope, and is sent through the beam splitter or the discriminator to detect by the detector. Based on different pollutants have different absorption cross sections, similar differential absorption lidar(DIAL), the on and off can be determined. The lidar using the frequency comb light source can be easy designed into a compact structure, which is convenient to carry and maintain. It’s also a very advantageous for the lidar miniaturization and industrialization with a wide application prospect.

Single-photon frequency-modulated continuous-wave Lidar based on quantum compressed sensing

Quantum compressed sensing-based compound system for ranging/vibration measurement

Quantum LiDAR with Frequency Modulated Continuous Wave

A 16-Channel Analog CMOS SiPM with On-Chip Front-End for D-ToF LiDAR

A Fully Solid-State Beam Scanner for FMCW LiDAR Application

A microcomb-empowered Fourier domain mode-locked LiDAR

Quantum enhancement detection techniques for FMCW LiDAR

Compact All-Fiber Quantum-Inspired LiDAR with > 100dB Noise Rejection and Single Photon Sensitivity

Frequency-Modulated Continuous-Wave LIDAR and 3D Imaging by Using Linear Frequency Modulation Based on Injection Locking

Synchronous measurement of velocity and distance with high resolution based on comb reference common-path interferometric FMCW lidar

SiPM-based LiDAR with multipulse sequence modulation and multithreshold signal processing

Hybrid Integrated Ultralow-Linewidth and Fast-Chirped Laser for FMCW LiDAR

A Hybrid Solid-State Beam Scanner for FMCW LiDAR Application.

Quantum Induced Coherence Light Detection and Ranging

Three-dimensional quantum imaging of dynamic targets using quantum compressed sensing

Noise-tolerant LiDAR approaching quantum-limited precision

Optical Frequency Comb Generation from a 1.65 Μm Single-Section Quantum Well Laser.

A Stepped FM/CW Lidar System Using a Dual Parallel Mach–Zehnder Modulator

Massively parallel FMCW lidar with cm range resolution using an electro-optic frequency comb

Frequency-modulated Continuous-Wave 3D Imaging with High Photon Efficiency.

A new Lidar technology using frequency comb light source